Smeg STO905 [29/35] En en user instructions

User instructions

GENERAL WARNINGS AND RECOMMENDATIONS FOR CORRECT

MAINTENANCE:

• The  lters should be cleaned under running water using a stiff brush.

• It is essential to thoroughly clean the  lters according to the above

instructions: the dishwasher cannot function if the  lters are clogged.

• Carefully replace  lters in their seats, to avoid damaging the wash

pump.

PROLONGED DISUSE:

• Run the soak program twice in succession.

• Unplug power cord from the socket.

• Leave the door slightly open, in order to prevent the formation of

unpleasant odours inside the washing tank.

• Fill the rinse aid dispenser.

• Shut off the water supply tap.

BEFORE STARTING THE DISHWASHER AFTER PROLONGED

DISUSE:

• Check that there are no deposits of sludge or rust inside the water pipe:

if there are, allow the water to run from the water supply tap for a few

minutes.

• Plug the power cord into the socket.

• Reconnect the water intake hose and open the tap again.

TROUBLESHOOTING MINOR PROBLEMS

In some cases it is possible to remedy minor problems by referring to the

following instructions:

If the program fails to start, check that:

• the dishwasher is connected to the electrical power supply;

• there is no power failure;

• the water tap is open;

• the dishwasher door is properly closed.

If water remains inside the dishwasher, check that:

• the drain hose is not kinked;

• the drain siphon is not obstructed;

• the dishwasher  lters are not clogged.