Ryobi ems1122lhg (3000692) — правила безопасной эксплуатации торцовочной пилы [4/120]

English carried out by authorised service agents shields during power tool operation or when blowing dust If operation is dusty also wear a dust mask Always use the protective shields on the machine Do not clamp the protective swing guard Do not use saw bla des wh ich are damaged or deform ed Replace the table insert when worn Do not use saw blades not corresponding to the key data given in these instructions for use The protective cover should only open when the machine is lowered to the workpiece Do not use saw blades made of high speed steel Any faults with the machine including any related to the safeguard or the saw blades must be reported to the persons in charge of safety as soon as the faults are discovered It is necessary to select a saw blade which is suitable for the material being cut Never use the mitre saw to cut materials other than those specified in the instruction manual The handle lock must always be transporting the mitre saw engaged when Only use the saw with guards in good working order and properly maintained and in position Keep the floor area free of loose material e g chips and cut offs Only use saw blades which have been properly sharpened It is essential to adhere to the maximum speed specified on the saw blade Any repairs must only be carried out by the laser manufacturer or authorized service agent Do not replace the laser with a different type Always use blades with correct size and shape of arbour holes Blades that do not match the mounting hardware of the saw will run eccentrically causing loss of control Use only blades specified in this manual complying with EN 847 1 INTENDED USE The mitre saw can be used for sawing solid wood bonded wood glued veneer materials similar to wood and plastics Do not use this product in any other way as stated for normal use LASER SAFETY Do not stare into beam during operation Do not project the laser beam directly into the eyes of others Serious eye injury could result Do not place the laser in a position that may cause anyone to stare into the laser beam intentionally or unintentionally Do not use optical tools to view the laser beam Do not use any flanges other than those supplied or indicated in the instruction manual to secure the saw blade Do not operate the laser around children or allow children to operate the laser Refrain from removing any cut offs or other parts of the workpiece from the cutting area whilst the machine is running and the saw head is not in the rest position Do not attempt to change any parts of the laser device by yourself Ensure that the machine is always stable and secure e g fixed to a bench Do not attempt to repair the laser device by yourself Any repairs must only be carried out by the laser manufacturer or authorized service agent Do not replace the laser with a different type Long workpieces must be adequately supported Do not use cracked or distorted saw blades ENVIRONMENTAL PROTECTION Before using the tool please read the instructions If possible have the tool demonstrated Recycle raw materials instead of disposing of as waste The machine accessories and packaging should be sorted for environmental friendly recycling The dust produced when using this tool may be harmful to health Use a dust absorption system and wear a suitable dust protection mask Remove deposited dust thoroughly e g with a vacuum cleaner Stock having a round or as firewood must not be held during cutting When edge a suitable auxiliary support irregular cross section such cut as it cannot be securely sawing thin stock layered on fence must be used for firm Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure Do not stare directly at the laser beam Always wear safety goggles or safety glasses with side 2 SYMBOL Safety alert C CE Conformity