Gorenje G64AX1 [36/47] Cleaning

CLEANING

IMPORTANT:

always disconnect the appliance from the gas

and electricity mains before carrying out any

cleaning operation.

2) HOT PLATE

Periodically wash the hot plate, the enamelled stell

pan support, the enamelled burner caps “C” and

the burner heads “T” (see fig. 6) with lukewarm

soapy water. Following this, all parts should be

thoroughly rinsed and dried. Never wash them

while they are still warm and never use abrasive

powders. Do not allow vinegar, coffee, milk, salted

water, lemon or tomato juice from remaining in

contact with the enamelled surfaces for long

periods of time.

WARNINGS:

comply with the following instructions, before

remounting the parts:

- check that burner head slots “T” (fig. 6) have

not become clogged by foreign bodies.

- Check that enamelled burner cap “C” (fig. 6)

have correctly positioned on the burner head.

It must be steady.

- The exact position of the pan support is

established by the rounded corners, which

should be set towards the side edge of the

hot plate.

- Do not force the taps if they are difficult open

or close. Contact the technical assistance

service for repairs.

- Don’t use steam jets for the equipment

cleaning.

FIG. 6