Gorenje G64AX1 [39/47] Installation

7) GAS CONNECTION

Before connecting the appliance, check that the values

on the data label affixed to the underside of the hot plate

correspond to those of the gas and electricity mains in

the home.

A label on the appliance indicates the regulating

conditions: type of gas and working pressure. Gas

connection must comply with the pertinent standards

and provisions in force.

When gas is supplied through ducts, the appliance must

be connected to the gas supply system:

o with a rigid steel pipe. The joints of this pipe must consist

of threaded fittings conforming to the standards.

o With copper pipe. The joints of this pipe must consist of

unions with mechanical seals.

o With seamless flexible stainless steel pipe. The length of

this pipe must be 2 meters at most and the seals must

comply with the standards.

When the gas is supplied by a bottle, the appliance must

be fuelled by a pressure governor conforming to the

provisions in force and must be connected:

o with a copper pipe. The joints of this pipe must consist of

unions with mechanical seals.

o With seamless flexible stainless steel pipe. The length of

this pipe must be 2 meters at most and the seals must

comply with the standards. It is advisable to apply the

special adapter to the flexible pipe. This is easily available

from the shops and facilitates connection with the hose

nipple of the pressure governor on the bottle.

o With rubber hose pipe in compliance with standards. The

diameter of this hose pipe must be 8 mm and its length

must be no less than 400 mm and no more than 1500

mm. It must be firmly fixed to the hose nipple by means of

the safety clamp specified by standards.

At the connection end, verify the gasproof using a soap solution,

never a flame.

WARNINGS:

remember that the gas inlet union on the appliance

is a 1/2" gas parallel male type in compliance with

EN 10226 standards.

- The appliance complies with the provisions of the

following CEE Directives:

90/396 + 93/68 regarding gas safety.

INSTALLATION