Tp-Link td-8901n [15/91] Installation environment

TD-W8901N

150Mbps Wireless N ADSL2+ Modem Router User Guide

seconds to quickly establish a connection between the router and client devices and

automatically configure wireless security for your wireless network. For details, please refer to

WPS Settings. If you press this button for more than 8 seconds, you will enable the RESET

function. There are two ways to reset the modem router's factory defaults.

Method one: With the modem router powered on, press and hold down the WPS/RESET

button on the rear panel for at least 8 seconds until some LEDs go off, then release the

button.

Method two: Restore the default setting from “Maintenance-SysRestart” of the modem

router's Web-based Utility.

 4, 3, 2, 1 (LAN): Through the port, you can connect the modem router to your PC or the other

Ethernet network devices.

 ADSL: Through the port, you can connect the modem router with the telephone. Or you can

connect them by an external separate splitter. For details, please refer to

2.4 Connecting the

Modem Router.

 Antenna: Used for wireless operation and data transmit.

2.3 Installation Environment

 The Product should not be located where it will be exposed to moisture or excessive heat.

 Place the modem router in a location where it can be connected to the various devices as well

as to a power source.

 Make sure the cables and power cord are safely placed out of the way so they do not create a

tripping hazard.

 The modem router can be placed on a shelf or desktop.

 Keep away from the strong electromagnetic radiation and the device of electromagnetic

sensitive.

Generally, TD-W8901N is placed on a horizontal surface. The device also can be mounted on the

wall as shown in Figure 2-3.