Moxa IKS-6728A-4GTXSFP-24-24-T [152/173] Speed duplex

Moxa IKS-6728A-4GTXSFP-24-24-T [152/173] Speed duplex
Moxa Command Line Interface (FW_5.x) Commands
2-142
Command
Modes
interface configuration
Usage
Guidelines
0 <= priority <= 240, and must be multiples of 16.
Examples
MOXA(config-rdnt)# spanning-tree priority
<UINT:prio> - Range from 0 to 61440, in steps of 4096
Error
messages
The bridge priority must be in the range from 0 to 240
The bridge priority must be multiples of 16
Related
commands
show redundancy spanning-tree
speed-duplex
Use the speed-duplex interface configuration command to specify the speed of the interface and its duplex
mode. Use the no form of this command to return the interface to its default value.
Commands
speed-duplex {10M-Full | 10M-Half | 100M-Full| 100M-Half | Auto}
no speed-duplex
Syntax
Description
speed-duplex Configure speed and duplex operation
10M-Full Speed 10M-full
10M-Half Speed 10M-Half
100M-Full
Speed 100M-Full
100M-Half Speed 100M-Half
Auto Speed Auto
Defaults The default is Auto
Command
Modes
Interface configuration
Usage
Guidelines
N/A
Examples
MOXA# configure terminal
MOXA(config)# interface trunk 1
MOXA(config-if)# speed-duplex 100M-Full
MOXA(config-if)# no speed-duplex
Error
messages
Fiber port can not be set speed-duplex!!!
This port can not be set to 1G!!!
Parameter does not be defined!!!
Cannot configure on trunk member port 1/1
This setting cannot be applied on trunk port!
Related
commands
show interfaces ethernet
sshkeygen
Use the sshkeygen user EXEC command to generate SSL host key.
Commands
sshkeygen
Syntax
Description
sshkeygen Generate SSH host key
Defaults N/A

Содержание

Похожие устройства

Скачать