Moxa IKS-6728A-4GTXSFP-24-24-T [85/173] Commands

Moxa IKS-6728A-4GTXSFP-24-24-T [85/173] Commands
Moxa Command Line Interface (FW_5.x) Commands
2-75
Related
commands
Exit
rate-limit
Use the rate-limit interface configuration command on the switch to configure the traffic rate allowed for the
specified port. Use the no form of this command to return to the default. For Marvell 88E6095 chipsets, use
rate-limit ingress rate to set the ingress rate limiting; for Broadcom chipsets, use rate-limit ingress
percentage to set the ingress rate limiting.
Commands
rate-limit { ingress | egress } percentage percentage
no rate-limit { ingress | egress }
[no] rate-limit action { drop-packet | port-disable }
rate-limit drop-packet { ingress | egress } percentage percentage
no rate-limit drop-packet { ingress | egress }
rate-limit port-disable period period
rate-limit port-disable ingress rate { none | 44640 | 74410 | 148810 | 223220 | 372030 | 520840
| 744050 }
Syntax
Description
rate-limit Rate limiting
drop-packet Rate limiting normal drop-packet
port-disable Rate limiting port-disable mode
ingress
Ingress rate limiting
egress Egress rate limiting
percentage Percentage correspond to current port speed
percentage Limit percentage, and will take effect at the percentage
0/3/5/10/15/25/35/50/65/85
rate Specify the rate
period Port disable period
period Seconds
Defaults 0 or none means unlimiting.
Command
Modes
Interface configuration
Usage
Guidelines
The percentage will only take effect at the 0/3/5/10/15/25/35/50/65/85 %.
For port disable mode, the port will be disabled when the ingress rate reach the specified packet
rate.
Examples
MOXA(config-if)# rate-limit percentage
<UINT:percent> - Limit percentage, and will take effect at the percentage
0/3/5/10/15/25/35/50/65/85
MOXA(config-if)# rate-limit ingress rate none none none none
MOXA(config-if)# rate-limit port-disable ingress period 30
MOXA(config-if)# rate-limit port-disable ingress rate 148810
Error
messages
Cannot configure on trunk member port 1/1!
This setting cannot be applied on trunk port!
Related
commands
show interfaces rate-limit
redundancy
Use the redundancy global configuration command on the switch to enter the redundancy configuration
mode.

Содержание

Похожие устройства

Скачать