Stiebel Eltron PSH 30 COMFORT UNIVERSAL 229269 [16/44] Operation

HTV`.HC

HTV`.HC

ĜōTZ+HB%HV`eC.pVZ< qqqĪZ`.<é<`VHCĪHB

4. Operation

Risk of damage

Only the contractor is permitted to remove the tempera-

ture selector.

4.1 Temperature setting

26_02_09_0137

1 Temperature selector

2 Rapid heat-up button

3 ON/OFF indicator

4 Frost protection setting 7 °C

E Economy setting 40 °C

e Economy setting 60 °C

5 Maximum set temperature

As soon as the water temperature drops below the selected value,

the heating element automatically switches on. The ON/OFF in-

dicator light illuminates until the selected temperature has been

reached.

For low water consumption or very hard water, we recommend a

low temperature setting, as water above approx. 55 °C deposits

limescale.

4.1.1 Holiday and absence

ª If the appliance is not in use for long periods, set it to frost

protection or disconnect it from the power supply, in order to

save energy.

ª For reasons of hygiene, heat up the content of the cylinder

once to above 60 °C before initial use.

4.2 Rapid heat-up

You can increase the output with the rapid heat-up button. A

second heating element is switched on (see chapter „Speciﬁcation

/ Data table“). The second heating element is switched off when

the selected temperature has been reached.

5. Cleaning, care and maintenance

ª Never use abrasive or corrosive cleaning agents. A damp

cloth is sufﬁcient for cleaning the appliance.

ª Check the taps regularly. You can remove limescale deposits

at the tap outlets using commercially available descaling

agents.

ª Have the electrical safety of the appliance and the func-

tion of the safety assembly regularly checked by a heating

contractor.

ª Have the protective magnesium anode checked by a heating

contractor after the ﬁrst year. The heating contractor will

then determine the intervals at which it must be checked

thereafter.

ª Regularly activate the safety valve to prevent it from becom-

ing blocked by limescale deposits.

6. What to do if ...

6.1 ... the appliance develops faults

%|şùŒ |şń¼ áV¼ă¼®ź

The water does not

heat up and the ON/OFF

indicator does not il-

luminate.

There is no power.

Check the fuse/MCB in

your fuse box/distribu-

tion panel.

The water does not heat

up sufficiently and the

ON/OFF indicator illumi-

nates.

The temperature is set

too low.

Select a higher tempera-

ture.

The appliance heats,

for example, after large

amounts of DHW have

been drawn.

Wait until the ON/OFF

indicator goes out.

The outlet flow rate is

low.

The perlator in the tap or

shower head is scaled or

contaminated.

Clean and/or descale the

perlator or the shower

head.

If you cannot remedy the fault, notify your heating contractor. To

facilitate and speed up your enquiry, please provide the serial

number from the type plate (000000 and 0000-00000):

(12

)12





26_02_07_0149

Stiebel Eltron PSH 30 COMFORT UNIVERSAL 229269 [16/44] Operation

Содержание

Похожие устройства