Moxa MPC-2260X [34/71] Mpc 2000 series hardware hardware installation and connection

MPC-2000 Series Hardware Hardware Installation and Connection

3-16

Installing a SATA Storage Drive

You can install a SATA hard disk drive (HDD) or sold state drive (SSD) in the MPC-2000 series. For added

reliability, we recommend that you install an SSD in the MPC-2000 series.

The procedure to install a SATA storage drive varies depending on your MPC-2000 series model.

On the MPC-2260 or MPC-2240

To install a SATA storage drive in an MPC

-2260 or MPC-

2240

anel computer, complete the following steps:

Locate the storage trays on the bottom panel of the

computer. For ease of installation, we recommend that

you

place the MPC-2260 or MPC-2240 on a non-abrasive

surface with its display panel facing down.

Use the protection key to unlock the storage tray cover.

Lift the lever to open the storage tray cover.

Orient the SATA storage (face up) drive and insert it into

the slot.

Push the lever to close the storage tray cover.

NOTE

If you are unable to properly

secure the SATA

storage drive in the storage tray, check that you have inserted

the

SATA storage drive correctly.

Use the protection key to lock the storage tray cover and secure the SATA storage drive in place.

To install the second SATA storage drive

, repeat steps 1 to 6. Make sure that you have securely fastened the

door lever.

If you are installing only one SATA storage drive in the

MPC-

2000 series, install the storage drive in the slot nearer

to the display panel. If you are installing two SATA st

orage

drives, install the first storage drive in the slot nearer to the

display panel and the second storage drive in the other

slot.

To remove a storage drive, pull out the lever and push the

tray door to the side to eject the SATA storage drive from

the slot; then, remove the SATA storage drive from the

computer.