Moxa MPC-2260X [59/71] Hdc configuration

MPC-2000 Series Hardware BIOS Setup

5-5

Mode

This setting allows you to configure the mode for the parallel port.

Options: SPP (default), EPP, ECP, EPP+ECP.

HDC Configuration

You can set the host drive controller in IDE (legacy default) or AHCI mode.

The following screen appears when you select the legacy IDE mode.

HDD Detect Delay Time

This setting allows you to set the time delay when detecting hard disks.

Option: 0 (default), 1, 2, 3 seconds.

Serial ATA Port 0 to 1

This setting allows you to display information about the installed drives.

AHCI SALP

Note that AHCI SALP only appears when you select the AHCI mode. This setting allows you to enable

Aggressive Link Power Management (SALP) in AHCI for the host bus adapter to conserve power by

detecting when a SATA drive is no longer processing information and then immediately setting it to suspended

or sleep mode without waiting for the software to initiate power-down processes.

Host Capability Register bit 26.

Options: Enabled (default), Disabled.