Moxa OnCell 5104-HSPA-T [20/67] Oncell 5000 series initial ip address configuration

OnCell 5000 Series Initial IP Address Configuration

3-6

8. Press A or use the arrow keys to select Save and then press ENTER. Press ENTER again to confirm the

save command.

9. Press R or use the arrow keys to select Restart and then press ENTER. Press ENTER again to restart the

OnCell 5000.

Serial Console

The OnCell 5000 can be configured through the serial console, which works the same as the Telnet console but

is accessed through the RS-232 console port rather than over the network.

The following instructions and screenshots show how to enter the serial console using PComm Terminal

Emulator, which is available free of charge as part of the PComm Lite suite. You may use a different terminal

emulator utility, although the actual screenshots and procedure may vary slightly from the following

instructions.

Before running PComm Terminal Emulator, use an RJ45 to DB9-F (or RJ45 to DB25-F) cable to connect the

OnCell 5000’s RS-232 console port to your PC’s COM port (generally COM1 or COM2, depending on how your

system is set up). After installing PComm Terminal Emulator, take the following steps to access the RS-232

console utility.

1. Turn off the OnCell 5000’s power, and then use a serial cable to connect the OnCell 5000’s serial console

port to your computer’s RS-232 serial port.

2. From the Windows desktop, select Start



All Programs



PComm Lite



Terminal Emulator.

3. The PComm Terminal Emulator window should appear. From the Port Manager menu, select Open (or

click the Open icon).