Moxa OnCell 5104-HSPA-T [26/67] Lan settings

OnCell 5000 Series Web Console Configuration

4-4

Local time: This field shows the time that you last opened or refreshed the browser. To set the local time for

the OnCell 5000, click on the Modify button, update the date and time, and then click on submit.

Time server: The OnCell 5000 uses SNTP (RFC-1769) for auto time calibration. You may enter a time server

IP address or domain name in this optional field. Once the OnCell 5000 is configured with the correct time

server address, it will request time information from the time server every 10 minutes.

Network Settings

LAN Settings

You can access LAN Settings by expanding the Network Settings item in the navigation panel. Use the LAN

Settings page to assign the OnCell 5000’s IP address, netmask, and other LAN Port configuration parameters.

Note: You must assign a valid IP address to your OnCell 5000 before it will work in your network environment.

Your network system administrator should provide you with a unique IP address and related settings for your

network. First-time users can refer to Chapter 3, Initial IP Address Configuration, for more information.

IP Address (default=192.168.127.254): Enter the IP address that is assigned to your OnCell 5000. All LAN

ports on the OnCell 5000 will share this IP address. An IP address is a number assigned to a network device

(such as a computer) as a permanent address on the network. Computers use the IP address to identify and

talk to each other over the network. Choose a proper IP address that is unique and valid for your network

environment.

Netmask (default=255.255.255.0): Enter the subnet mask. A subnet mask represents all of the network hosts

at one geographic location, in one building, or on the same local area network. When a packet is sent out over

the network, the OnCell 5000 will use the subnet mask to check whether the desired TCP/IP host specified in

the packet is on the local network segment. If the address is on the same network segment as the OnCell 5000,

a connection is established directly from the OnCell 5000. Otherwise, the connection is established through the

given default gateway.