Moxa VPort P06-1MP-M12-CAM42 [10/65] Vport p06 1mp m12 introduction

VPort P06-1MP-M12 Introduction

1-6

NOTE

RCA audio connectors are popular and easy to find on the market. If a different audio connector is required,

please contact your Moxa sales representative for customization service.

• Solid plastic top cover: This top cover can be removed when tuning the camera lens position.

• Transparent dome cover: The VPort P06-1MP-M12 is designed with a transparent PC dome cover, which

is vandal-proof with EN 62262 (IEC62262) class IK9 level protection.

• Torx screw for top cover: There are 2 torx screws for the top cover. These 2 torx screws are designed

with anti-shedding for convenient installation. The user can use the L-type torx screw driver for loosening

or fixing the top cover.

NOTE

The color of the camera casing can be customized based on your installation environment. Please contact your

Moxa sales representative for this customization service.

Inside the camera

• Mounting screw hole: There are 4 mounting screw holes for mounting the VPort P06-1MP-M12.

• Thumb screw for fixing the lens position: To tune the lens’s position, loosen this thumb screw. After the

position tuning is done, secure this thumb screw.

• Lens with fixed focal length: The VPort P06-1MP-M12 is designed to use different fixed focal-length

lenses. Choose the appropriate focal-length lens based on the viewing angle and object distance of your

application.

• Hardware reset button: Use a pointed stick to push down the reset button to reboot or restore factory

defaults.

 Reboot: press the button one time.

 Reset to factory default: press the button and hold for at least 5 seconds.

• Calibration for rotating the lens (0 to 360°): Rotate the lens to get the optimal image, and then mark

the position with this calibration for future replacement or mass installation.

• Calibration for tuning lens’s vertical position (0 to 90°): After tuning the lens’s vertical position, mark

the position with this calibration for future replacement or mass installation.

• Calibration for tuning lens’s horizontal position (±30°): After tuning the lens’s horizontal position,

mark the position with this calibration for future replacement or mass installation.