Moxa VPort P06HC-1MP-M12-CAM36 [46/69] Vport p06hc 1mp m12 system configuration
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Moxa VPort P06HC-1MP-M12-CAM36 [46/69] Vport p06hc 1mp m12 system configuration

Moxa VPort P06HC-1MP-M12-CAM36 [46/69] Vport p06hc 1mp m12 system configuration
VPort P06HC-1MP-M12 System Configuration
4-24
Environment
Setting Description Default
Environment Choose the kind of environment the VPort camera be installed
in; parameters will be optimized depending on which
environment is specified.
50 Hz anti-flicker: This setting should be enabled when the
camera is installed in a 50 Hz power frequency environment,
for anti-image flicker.
60 Hz anti-flicker: This setting should be enabled when the
camera is installed in a 60 Hz power frequency environment ,
for anti-image flicker
60Hz anti-flicker
Auto exposure level A higher level will reduce the shutter speed, resulting in a
brighter image; a lower level will have the opposite effect.
+0
Image Adjustment
Setting Description Default
Contrast & Sharpness Tune the image attribute to a value between -4 and + 4 0
Appearance Normal: Normal view
Mirror: Image will be displayed as in a mirror
Flip: 180 degree rotation followed by a mirrored display
180 degree rotation: Image is rotated 180 degrees
Normal
Auto Gain Control
(AGC)
The AGC function provides a clear image in low light cond
itions.
An amplifier is used to boost the video signal when the light
dims to increase the camera’s sensitivity. In some bright
environments, the amplifier may be overloaded, resulting in a
distorted video signal. For this reason, it may be necessary to
monitor the signal level with the AGC control circuit, and in
some cases AGC will need to be switched off.
2x
AWB
(Auto White Balance)
In most conditions you should choose ATW, which allows the
camera to automatically adjust the white balance. AWB is
recommended when your camera is focused on a scene in
which one color occupies most of the view.
Take these steps to use AWB:
1. Focus the camera on a white color in an actual
environment with normal lighting.
2. Select AWB and then press Save.
3. Move the camera back to the scene that will be monitored.
ATW

Содержание

Похожие устройства

Скачать