Moxa VPort P16-1MP-M12-CAM80-CT [24/64] Firmware upgrade

VPort ONVIF Profile S System Configuration

4-9

NOTE

A maximum of 500 lines is displayed in the log. Earlier

log entries are stored in the VPort’s database, which

the

administrator can export

at any time.

System Parameters

The System Parameters page allows you to view all system parameters, which are listed by category. The

content is the same as the VPort’s sys_config.ini file. Administrators can also save this information in a file

(sys_config.ini) by clicking the Export to a File button, or import a file by clicking the Browse button to search

for a sys_config.ini file and then clicking the Import a System Parameter File button to update the system

configuration quickly.

NOTE

The system parameter import/export functions allow the administrator to back

up and restore system

configurations. The Administrator can export this sys_config.ini file (in a special binary format) for backup, and

import the sys_config.ini file to restore the system configurations of VPort IP cameras. System configuration

changes will take effect after the VPort is rebooted.

Firmware Upgrade

Take the following steps to upgrade the firmware:

Step 1:

Press the

Browse button to select the firmware file.

NOTE

For the VPort, the firmware file extension should be .

rom.

Step 2:

Click on the

Upgrade button to upload the firmware to the VPort.

Step 3:

The system will start the firmware upgrade process.

Step 4:

Once

Success …..Step 3/3 : System reboot is displayed, wait 30 seconds for

the VPort to reboot.