Tp-Link T2700G-28TQ [173/420] Dhcp relay

Tp-Link T2700G-28TQ [173/420] Dhcp relay
161
Step Operation Note
4
Configure the IP
address pool
Required. On page RoutingDHCP ServerPool Setting,
configure IP address pool pa
rameters for each VLAN interface.
Take VLAN10 as an example, configure its Network Address as
192.168.10.0, Subnet Mask as 255.255.255.0, Default gateway as
192.168.10.1 (the IP address of the VLAN interface), DNS Server
as 160.20.30.2, and customize the Pool Name and Lease Time.
5
Configure the
reserved
addresses
Required. On page RoutingDHCP ServerDHCP Server,
under the Excluded IP Address, configure reserved IP addresses
for the fixed computers in each VLAN.
6
Manually binding
IP addresses
Optional. On page Routing DHCP ServerManual Binding,
bind specified ip addresses to the specific clients.
Configure Access Switch
Step Operation Note
1 Enable DHCP
Relay.
Required. On the Routing→DHCP Server→Global Config page,
enable
the DHCP Server function, and the DHCP Relay function
will be enabled at the same time.
2 Configure Option
82 support.
Optional. On the Routing→DHCP Relay→Global Config page,
configure the Option 82 parameters.
3 Configure DHCP
Server.
Required. On the Routing→DHCP Relay→DHCP Server page,
specify the DHCP Server with the IP address of the central switch.
10.5 DHCP Relay
Application Environment of DHCP Relay
In DHCP model, DHCP clients broadcast its DHCP request, so the DHCP sever and clients must
be on the same subnet, which require the DHCP server is available in every subnet. It is costly to
build so much DHCP Server. DHCP relay agent solves the problem. Via a relay agent, DHCP
clients request an IP address from the DHCP server in another subnet, and DHCP clients in
different subnets can share the same DHCP server in the internet.
Details of DHCP Relay on T2700G-28TQ
A typical application of T2700G-28TQ working at DHCP Relay function is shown below. It can be
altered to meet the network requirement.

Содержание

Похожие устройства