Indesit PBAA 34 NF [12/72] Installation

Indesit PBAA 34 NF [12/72] Installation
12
GB
Installation
! Before placing your new appliance into operation please
read these operating instructions carefully. They contain
important information for safe use, for installation and for
care of the appliance.
! Please keep these operating instructions for future
reference. Pass them on to possible new owners of the
appliance.
Positioning and connection
Positioning
1. Place the appliance in a well-ventilated humidity-free
room.
2. Do not obstruct the rear fan grills. The compressor and
condenser give off heat and require good ventilation to
operate correctly and save energy.
3. Leave a space of at least 10 cm between the top part of
the appliance and any furniture above it, and at least 5
cm between the sides and any furniture/side walls.
4. Ensure the appliance is away from any sources of heat
(direct sunlight, electric stove, etc.).
5. In order to maintain the correct distance between the
appliance and the wall behind it, fit the spacers supplied
in the installation kit, following the instructions provided.
Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the
refrigerator by tightening or loosening the rear feet.
Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to
the electricity mains. Before inserting the plug into the
electrical socket ensure the following:
The appliance is earthed and the plug is compliant with
the law.
The socket can withstand the maximum power of the
appliance, which is indicated on the data plate located on
the bottom left side of the fridge (e.g. 150 W).
The voltage must be in the range between the values
indicated on the data plate located on the bottom left
side (e.g. 220-240V).
The socket is compatible with the plug of the appliance.
If the socket is incompatible with the plug, ask an
authorised technician to replace it (see Assistance). Do
not use extension cords or multiple sockets.
! Once the appliance has been installed, the power supply
cable and the electrical socket must be easily accessible.
! The cable must not be bent or compressed.
! The cable must be checked regularly and replaced by
authorised technicians only (see Assistance).
! The manufacturer declines any liability should these
safety measures not be observed.
Reversible doors
1
2
3
4
5
3mm

Содержание

Installation GB Before placing your new appliance into operation please read these operating instructions carefully They contain important information for safe use for installation and for care of the appliance Please keep these operating instructions for future reference Pass them on to possible new owners of the appliance Positioning and connection Positioning 1 Place the appliance in a well ventilated humidity free room 2 Do not obstruct the rear fan grills The compressor and condenser give off heat and require good ventilation to operate correctly and save energy 3 Leave a space of at least 10 cm between the top part of the appliance and any furniture above it and at least 5 cm between the sides and any furniture side walls 4 Ensure the appliance is away from any sources of heat direct sunlight electric stove etc 5 In order to maintain the correct distance between the appliance and the wall behind it fit the spacers supplied in the installation kit following the instructions provided Levelling 1 Install the appliance on a level and rigid floor 2 If the floor is not perfectly horizontal adjust the refrigerator by tightening or loosening the rear feet Electrical connections After the appliance has been transported carefully place it vertically and wait at least 3 hours before connecting it to the electricity mains Before inserting the plug into the electrical socket ensure the following The appliance is earthed and the plug is compliant with the law The socket can withstand the maximum power of the appliance which is indicated on the data plate located on the bottom left side of the fridge e g 150 W The voltage must be in the range between the values indicated on the data plate located on the bottom left side e g 220 240V The socket is compatible with the plug of the appliance If the socket is incompatible with the plug ask an authorised technician to replace it see Assistance Do not use extension cords or multiple sockets Once the appliance has been installed the power supply cable and the electrical socket must be easily accessible The cable must not be bent or compressed The cable must be checked regularly and replaced by authorised technicians only see Assistance The manufacturer declines any liability should these safety measures not be observed 12 Reversible doors