Indesit PBAA 34 NF [19/72] Malfunctions possible causes solutions

Indesit PBAA 34 NF [19/72] Malfunctions possible causes solutions
GB
19
Troubleshooting
Malfunctions:
The green POWER indicator light does
not illuminate.
The motor does not start.
The indicator lights are on but the light
is dim.
a) The alarm sounds.
b) The alarm sounds and the two
yellow indicator lights flash.
c) The alarm sounds and the two
yellow indicator lights as well as the
green one flash.
The green POWER indicator light
flashes.
The refrigerator and the freezer do not
cool well.
The food inside the refrigerator is
beginning to freeze.
The motor runs continuously.
The appliance makes a lot of noise.
Some of the external parts of the
refrigerator become hot
Possible causes / Solutions:
The plug has not been inserted into the electrical socket, or not far
enough to make contact, or there is no power in the house.
The appliance comes with a motor protection control (see Start-up and use).
Pull out and reverse the plug before putting it back in the socket.
a) The refrigerator door has remained open for more than two minutes (the
buzzer will stop sounding when you shut the door) or the correct
switching-off procedure was not followed (see Maintenance).
b) The temperature in the freezer is too high. Check the quality of the food
products and dispose if necessary.
c) The temperature in the freezer has reached a dangerous level. The
food must be disposed immediately.
b/c) In the first case the freezer will maintain a temperature of about 0°C
so that the food does not re-freeze. In the second case, however, the
temperature will remain at approximately -18°C.
To turn off the acoustic signal open and close the refrigerator door.
To restore normal operation bring the FREEZER OPERATION knob
setting to
(off) and turn the appliance on again.
The appliance is not operating correctly. Contact the Technical
Assistance Centre.
The doors do not close properly or the seals are damaged.
The doors are opened too frequently.
The OPERATION knobs are not on the correct setting (see Description).
The refrigerator or the freezer have been over-filled.
The REFRIGERATOR OPERATION knob is not on the correct setting
(see Description).
The food is in contact with the back inside wall of the refrigerator.
The SUPER FREEZE button has been pressed (rapid freezing): the
yellow SUPER FREEZE light is on (see Description).
The door is not closed properly or is continuously opened.
The outside ambient temperature is very high.
The appliance has not been installed on a level surface (see
Installation).
The appliance has been installed between cabinets that vibrate and
make noise.
The internal refrigerant makes a slight noise even when the compressor
is off. This is not a defect, it is normal.
Temperaturile ridicate sunt necesare pentru a evita formarea apei de
condens în anumite zone ale produsului.
+ buzzer
Heating
danger
+ buzzer
Heating
is excessive

Содержание

Troubleshooting Qinoesu Malfunctions Possible causes Solutions The green POWER indicator light does not illuminate The plug has not been inserted into the electrical socket or not far enough to make contact or there is no power in the house The motor does not start The appliance comes with a motor protection control see Start up and usé The indicator lights are on but the light is dim Pull out and reverse the plug before putting it back in the socket a The alarm sounds a The refrigerator door has remained open for more than two minutes the buzzer will stop sounding when you shut the door or the correct switching off procedure was not followed see Maintenance b The temperature in the freezer is too high Check the quality of the food products and dispose if necessary c The temperature in the freezer has reached a dangerous level The food must be disposed immediately b The alarm sounds and the two yellow indicator lights flash c The alarm sounds and the two yellow indicator lights as well as the green one flash W y n Oy W Heating is excessive buzzer____________________ id Heating Y danger buzzer_____________________ b c In the first case the freezer will maintain a temperature of about 0 C so that the food does not re freeze In the second case however the temperature will remain at approximately 18 C To turn off the acoustic signal open and close the refrigerator door To restore normal operation bring the FREEZER OPERATION knob setting to off and turn the appliance on again The green POWER indicator light flashes The appliance is not operating correctly Contact the Technical Assistance Centre The refrigerator and the freezer do not cool well The doors do not close properly or the seals are damaged The doors are opened too frequently The OPERATION knobs are not on the correct setting see Description The refrigerator or the freezer have been over filled The food inside the refrigerator is beginning to freeze The REFRIGERATOR OPERATION knob is not on the correct setting see Description The food is in contact with the back inside wall of the refrigerator The motor runs continuously The SUPER FREEZE button has been pressed rapid freezing the yellow SUPER FREEZE light is on see Description The door is not closed properly or is continuously opened The outside ambient temperature is very high The appliance makes a lot of noise The appliance has not been installed on a level surface see Installation The appliance has been installed between cabinets that vibrate and make noise The internal refrigerant makes a slight noise even when the compressor is off This is not a defect it is normal Some of the external parts of the refrigerator become hot Temperaturile ridicate sunt necesare pentru a évita formarea apei de condensîn anumite zone ale produsului 19