Ryobi rlt4125 [4/144] Transportation and storage
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Ryobi rlt4125 [4/144] Transportation and storage

Ryobi rlt4125 [4/144] Transportation and storage
2 | English
■ Before use and after any impact, check that there are
no damaged parts. A defective switch or any part that
is damaged or worn should be properly repaired or
replaced by an authorised service centre.
■ Make sure the cutting attachment is properly installed
and securely fastened.
■ Never operate the product unless all guards, deflectors,
and handles are properly and securely attached.
■ Consider the environment in which you are working.
Keep the working area free from wires, sticks, stones
and debris, which if struck by the cutter, can become
thrown objects.
LAWN TRIMMER/EDGE TRIMMER SAFETY
WARNINGS
■ Use the product in daylight or with good artificial light.
■ Avoid using on wet grass.
■ Do not walk backwards when using the product.
■ Keep firm footing and balance. Do not overreach.
Overreaching can result in loss of balance. Always be
sure of your footing on slopes. Walk, never run.
■ Keep bystanders, children and pets 15 m away from
the area of operation, stop the product if anyone enters
the area.
■ Keep the cutting attachment below waist level.
■ Never operate the product with damaged guards or
without guards in place.
■ Never fit a metal replacement line.
■ Keep hands and feet away from the cutting means at all
times, especially when switching on the motor.
■ Beware, the cutting elements continue to rotate after
the motor is switched off.
■ Beware of objects thrown by the cutting means. Clear
debris like small stones, gravel, and other foreign
objects from the work area before starting operation.
Wires or string may become entangled with the cutting
means.
■ Switch off and disconnect from the power supply before:
● servicing
● leaving the product unattended
● cleaning your product or clearing a blockage
● changing accessories
● checking for any damage after hitting a foreign
object
● checking for any damage if the product starts to
vibrate abnormally
● performing maintenance
■ The small blade fitted to the lawn guard is designed to
trim the new extended line to the correct length for safe
and optimum performance. It is very sharp; do not touch
it, particularly when cleaning the product.
■ Always ensure that ventilation openings are kept clear
of debris.
■ Make sure the cutting head attachment is properly
installed and securely fastened.
■ Make sure all guards, deflectors and handles are
properly and securely attached.
■ Do not modify the product in any way. This may
increase the risk of injury to yourself or others.
■ Use only the manufacturer’s replacement cutting line.
Do not use any other cutting attachment.
■ Immediately switch off and disconnect from the mains
in the event of accident or breakdown. Don’t operate
the product again until it has been fully checked by an
authorised service centre.
TRANSPORTATION AND STORAGE
■ Stop the product and allow it to cool down before
storing or transporting. Always disconnect from the
power supply and wind the cable to prevent damage.
■ Clean all foreign materials from the product. Store it in a
cool, dry, and well-ventilated place that is inaccessible
to children. Keep away from corrosive agents, such
as garden chemicals and de-icing salts. Do not store
outdoors.
■ For transportation in vehicles, secure the product
against movement or falling to prevent injury to persons
or damage to the product.
MAINTENANCE
WARNING
Use only original manufacturer’s replacement parts,
accessories and attachments. Failure to do so can
cause possible injury, poor performance, and may void
your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed service
technician. For service, bring the product to your nearest
authorised service center for repair. When servicing, use
only identical replacement parts.
■ Switch off and disconnect from the mains before
conducting any maintenance or cleaning work.
■ You may make adjustments and repairs described in
this manual. For other repairs, contact the authorised
service agent.
■ For the replacement line, use only nylon filament line
of the diameter described in the specification table of
this manual.
■ After extending the new cutter line, always return the
product to its normal operating position before starting.
■ After each use, clean the product with a soft dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■ Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in a safe
working condition.
RESIDUAL RISKS
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk

Содержание

Похожие устройства

Before use and after any impact check that there are no damaged parts A defective switch or any part that is damaged or worn should be properly repaired or replaced by an authorised service centre Do not modify the product in any way This may increase the risk of injury to yourself or others Make sure the cutting attachment is properly installed and securely fastened Immediately switch off and disconnect from the mains in the event of accident or breakdown Don t operate the product again until it has been fully checked by an authorised service centre Neveroperate the product unless all guards deflectors and handles are properly and securely attached Consider the environment in which you are working Keep the working area free from wires sticks stones and debris which if struck by the cutter can become thrown objects LAWN TRIMMER EDGE TRIMMER SAFETY WARNINGS Use the product in daylight or with good artificial light Avoid using on wet grass Do not walk backwards when using the product Keep firm footing and balance Do not overreach Overreaching can result in loss of balance Always be sure of your footing on slopes Walk never run Keep bystanders children and pets 15 m away from the area of operation stop the product if anyone enters the area Use only the manufacturer s replacement cutting line Do not use any other cutting attachment TRANSPORTATION AND STORAGE Stop the product and allow it to cool down before storing or transporting Always disconnect from the power supply and wind the cable to prevent damage Clean all foreign materials from the product Store it in a cool dry and well ventilated place that is inaccessible to children Keep away from corrosive agents such as garden chemicals and de icing salts Do not store outdoors For transportation in vehicles secure the product against movement or falling to prevent injury to persons or damage to the product MAINTENANCE A WARNING Keep the cutting attachment below waist level Never operate the product with damaged guards or without guards in place Never fit a metal replacement line Keep handsand feet away from the cutting means at all times especially when switching on the motor Beware the cutting elements continue to rotate after the motor is switched off Beware of objects thrown by the cutting means Clear debris like small stones gravel and other foreign objects from the work area before starting operation Wires or string may become entangled with the cutting means Switch offanddisconnectfromthepowersupplybefore servicing leaving the product unattended cleaning your product or clearing a blockage changing accessories checking for any damage after hitting a foreign object checking for any damage if the product starts to vibrate abnormally performing maintenance The small blade fitted to the lawn guard is designed to trim the new extended line to the correct length for safe and optimum performance Itis very sharp do not touch it particularly when cleaning the product Always ensure that ventilation openings are kept clear of debris Make sure the cutting head attachment is properly installed and securely fastened Make sure all guards deflectors and handles are properly and securely attached 2 I English Use only original manufacturer s replacement parts accessories and attachments Failure to do so can cause possible injury poor performance and may void your warranty A WARNING Servicing requires extreme care and knowledge and should be performed only by a qualified service technician For service bring the product to your nearest authorised service center for repair When servicing use only identical replacement parts Switch off and disconnect from the mains before conducting any maintenance or cleaning work You may make adjustments and repairs described in this manual For other repairs contact the authorised service agent For the replacement line use only nylon filament line of the diameter described in the specification table of this manual After extending the new cutter line always return the product to its normal operating position before starting After each use clean the product with a soft dry cloth Any part that is damaged should be properly repaired or replaced by an authorised service centre Check all nuts bolts and screws at frequent intervals for proper tightness to ensure the product is in a safe working condition RESIDUAL RISKS Even when the product is used as prescribed it is still impossible to completely eliminate certain residual risk

Скачать
Случайные обсуждения

Ответы 1

Подскажите пожалуйста, подача лески у данного триммера автоматическая?
3 года назад

Ответы 0

Здравствуйте, сколько времени можно косить .
2 года назад