Home
Главная
Ryobi
Пила Цепная
rcs3840t
Инструкция по эксплуатации Страница: 4

Ryobi rcs3840t [4/350] English

2 | English

CHAINSAW SAFETY WARNINGS

Ŷ Always fit the guide bar cover when the product is not in

use or being carried or transported. This will help reduce

the risk of accidental contact with the sharp blades on

the chain. Carry the product by the top handle with the

guide bar facing away from your body.

Ŷ You should get used to your new product by making

simple cuts on securely supported wood. Do this

whenever you have not operated the product for some

time.

Ŷ Cut logs on a saw horse or cradle when operating the

product for the first time.

Ŷ Ensure all the guards, handles and spiked bumper are

properly fitted and are in good condition.

Ŷ Persons using the product should be in good health.

The product is a heavy unit so the operator requires

to be physically fit. The operator should be alert, have

good vision, mobility, balance and manual dexterity. If

there is any doubt, do not operate the product.

Ŷ Do not stand on any unstable surface while using

the product. This could include, but is not limited, to

ladders, scaffolds, and trees. Keep both hands on the

handles of the product at all times.

Ŷ Do not start using the product until you have a clear

work area, secure footing, and a planned retreat path

away from the falling tree.

Ŷ Use extreme caution when cutting small-size branches

and sapling because slender material may catch the

saw chain and be whipped toward you or pull you off

balance.

Ŷ When cutting a limb under tension, be alert for spring

back so that you will not be struck when the tension in

the wood fibres in released.

Ŷ Beware of the emission of exhaust gases, lubricant mist

and saw dust. Wear mask or respirator if required.

Ŷ Do not cut vines and small undergrowth (less than 75

mm in diameter).

Ŷ Always hold the product with both hands when

operating it. Use a firm grip with thumbs and fingers

encircling the handles of the product. Right hand must

be on the rear handle and left hand on the front handle

Ŷ Before starting the engine, make sure the saw chain is

not contacting any object. Always start the product with

the chain brake applied (pushed fully forward).

Ŷ Do not modify your product in any way or use it to power

any attachments or devices not recommended by the

manufacturer for your product.

Ŷ There should be a first-aid kit containing large

wound dressings and a means to summon attention

(e.g., whistle) close to the operator. A larger more

comprehensive kit should be reasonably nearby.

Ŷ The operator may be tempted to remove the helmet if

there is no danger of falling objects in the work area, but

the helmet, particularly with the mesh visor, can help

reduce the potential for injury to the face and head if

kickback occurs.

Ŷ An incorrectly tensioned chain can jump off the guide

bar and could result in serious injury or fatality. The

length of chain depends on the temperature of the chain

and chain wear. Check the tension frequently.

Ŷ Keep handles dry, clean, and free from oil and grease.

Greasy and oily handles are slippery, causing loss of

control.

Ŷ To reduce the risk of injury associated with contacting

moving parts, always stop the engine, apply chain

brake, remove the spark plug wire and make sure all

moving parts have been come to a stop before

Ɣ cleaning or clearing a blockage

Ɣ leaving the product unattended

Ɣ installing or removing attachments

Ɣ checking, maintenance or working on the product

Ŷ The size of the work area depends on the job being

performed as well as the size of the tree or work piece

involved. For example, felling a tree requires a larger

work area than making other cuts, i.e., bucking cuts.

The operator needs to be aware and in control of

everything happening in this work area.

Ŷ Do not cut with your body in line with the guide bar

and chain. If you do experience kickback, this will help

prevent the chain from coming into contact with your

head or body.

Ŷ Do not use a back-and-forward sawing motion; let the

chain do the work. Keep the chain sharp, and do not try

to push the chain through the cut.

Ŷ Do not put pressure on the saw at the end of the cut.

Be ready to take on the weight of the saw as it cuts free

from the wood. Failure to do so could result in possible

serious personal injury.

Ŷ Do not stop the saw in the middle of a cutting operation.

Keep the saw running until it is already removed from

the cut.

Personal protective equipment

Good quality, personal protective equipment as used

by professionals will help to reduce the risk of injury to

the operator. The following items should be used when

operating the product:

Safety helmet

– should comply with EN 397 and be CE marked

Hearing protection

– should comply with EN 352-1 and be CE marked

Eye and face protection

– should be CE marked and comply with EN 166 (for

safety glasses) or EN 1731 (for mesh visors)

Gloves

– should comply with EN381-7 and be CE marked

Leg protection (chaps)

– should comply with EN381-5, be CE marked and

provide all-round protection.

Chainsaw safety boots

– should comply with EN ISO 20345:2004 and be

marked with a shield depicting a chainsaw to show

compliance with EN 381-3. (Occasional users

may use steel toe-cap safety boots with protective

gaiters which conform to EN 381-9 if the ground is

even and there is little risk of tripping or catching on

undergrowth)

Ryobi rcs3840t [4/350] English

Содержание

Похожие устройства