![Adaptec ASR-8405 SGL [56/117] Installing with ubuntu linux](/img/pdf.png)
Adaptec ASR-8405 SGL [56/117] Installing with ubuntu linux
![Adaptec ASR-8405 SGL [56/117] Installing with ubuntu linux](/views2/1257296/page56/bg38.png)
cp -f /AACRAID/aacraid.ko-PRE_MOD
/lib/modules/2.6.32-5-486/kernel/drivers/scsi/aacraid/aacraid.ko
Debian 64-bit:
cp -f /AACRAID/aacraid.ko
/lib/modules/2.6.32-5-amd64/kernel/drivers/scsi/aacraid/aacraid.ko
6. Remove the USB drive.
7. Install the loadable module:
Debian 32-bit:
insmod /lib/modules/2.6.32-5-486/kernel/drivers/scsi/aacraid/aacraid.ko
Debian 64-bit:
insmod /lib/modules/2.6.32-5-amd64/kernel/drivers/scsi/aacraid/aacraid.ko
8. Press CTRL+ALT+F5 to switch back to the installation screen, then follow the on-screen prompts
to continue the installation.
Note: Do not press Continue at the end of the installation until you complete Step
[9]!
9. When prompted to reboot the system, press CTRL+ALT+F2 to switch to the console.
10. Type the following commands to complete the driver installation:
Debian 32-bit:
cp -f /AACRAID/aacraid.ko-POST_MOD
/target/lib/modules/2.6.32-5-486/kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.32-5-486
update-initramfs -u -v
exit
Debian 64-bit:
cp -f /AACRAID/aacraid.ko
/target/lib/modules/2.6.32-5-amd64/kernel/drivers/scsi/aacraid/aacraid.ko
chroot /target
/sbin/depmod -a 2.6.32-5-amd64
update-initramfs -u -v
exit
11. Press CTRL+ALT+F5 to switch back to the installation screen, then reboot.
12. Continue with Managing Your Storage Space on page 68.
Installing with Ubuntu Linux
Note: You will need your Ubuntu Installation CD to complete this task. You must have
root privileges to install the driver image.
To install the Adaptec RAID controller driver while installing Ubuntu Linux:
1. Insert the Ubuntu Installation CD, then restart your computer.
2. When the installation menu appears, select Install Ubuntu Server. Continue the installation until
the "Congure Network" screen appears, then type CTRL+ALT+F2 to switch to the console.
3. Insert the USB driver disk, then type the following command to scan for the device:
fdisk -l
56Proprietary and Condential to PMC-Sierra, Inc.
Document No.: CDP-00283-04-A Rev. A, Issue
Serial Attached SCSI RAID Controllers Installation and User's Guide
Содержание
- Raid_iug pdf 1
- Revision history 3
- Contents 4
- Adaptec by pmc product support 8
- Limited 3 year hardware warranty 10
- Regulatory compliance statements 11
- Asr 81605zq afm 700 13
- This equipment is home use class b electromagnetic wave suitability equipment and to be used mainly at home and it can be used in all areas 13
- About this guide 14
- Terminology used in this guide 14
- What you need to know before you begin 14
- How to find more information 15
- Kit contents 16
- Kit contents and system requirements 16
- System requirements 16
- About your raid controller 17
- Advanced data protection suite 17
- Array level features 17
- Standard raid controller features 17
- Adding a flash backup module 18
- Upgrading the controller firmware 18
- About the adaptec raid 6405 19
- Activity leds 19
- Aggregate activity 19
- Back of card 19
- Daughterboard connector 19
- Diagnostic leds 19
- Drive activity led connector f or cn0 19
- Ext alarm connector 19
- Hda mode connector 19
- I2c connector for cn0 19
- Internal mini sas connector cn0 19
- Mounting bracket 19
- Pcie x8 connector 19
- The adaptec raid 6405 is a sas raid controller with these features 19
- About the adaptec raid 6445 20
- The adaptec raid 6445 is a sas raid controller with these features 20
- About the adaptec raid 6805 6805q 21
- The adaptec raid 6805 6805q is a sas raid controller with these features 21
- About the adaptec raid 6405e 22
- Drive activity led connector for cn0 22
- Ext alarmconnector aggregate activity 22
- Hda mode connector 22
- Internal mini sas connector cn0 22
- Mounting bracket 22
- Pcie x1 connector 22
- The adaptec raid 6405e is a sas raid controller with these features 22
- About the adaptec raid 6805e 6805e r5 23
- The adaptec raid 6805e 6805e r5 is a sas raid controller with these features 23
- About the adaptec raid 6405t 24
- The adaptec raid 6405t is a sas raid controller with these features 24
- About the adaptec raid 6805t 6805tq 25
- The adaptec raid 6805t 6805tq is a sas raid controller with these features 25
- About the adaptec raid 7805 7805q 26
- Daughterboard connector 26
- Ext alarm connector 26
- Hda mode connector 26
- Internal mini sas hd connectors 26
- Mounting bracket 26
- Pcie x8 connector 26
- The adaptec raid 7805 7805q is a sas raid controller with these features 26
- About the adaptec raid 71605 71605q 27
- Daughterboard connector 27
- Ext alarm connector 27
- Hda mode connector 27
- Internal mini sas hd connectors 27
- Mounting bracket 27
- Pcie x8 connector 27
- The adaptec raid 71605 71605q is a sas raid controller with these features 27
- About the adaptec raid 71605e 28
- Ext alarm connector 28
- Hda mode connector 28
- Internal mini sas hd connectors 28
- Mounting bracket 28
- Pcie x8 connector 28
- The adaptec raid 71605e is a sas raid controller with these features 28
- About the adaptec raid 71685 29
- Daughterboard connector 29
- Ext alarm connector 29
- External mini sas hd connectors 29
- Hda mode connector 29
- Internal mini sas hd connectors 29
- Mini sas hd x4 sff 8644 connectors external 29
- Mounting bracket 29
- Pcie x8 connector 29
- The adaptec raid 71685 is a sas raid controller with these features 29
- About the adaptec raid 72405 30
- Daughterboard connector 30
- Ext alarm connector 30
- Hd connectors 30
- Hda mode connector 30
- Internal mini sas 30
- Mounting bracket 30
- Pcie x8 connector 30
- The adaptec raid 72405 is a sas raid controller with these features 30
- About the adaptec raid 78165 31
- Mini sas hd x4 sff 8644 connectors external 31
- The adaptec raid 78165 is a sas raid controller with these features 31
- About the adaptec raid 8405 32
- The adaptec raid 8405 is a sas raid controller with these features 32
- About the adaptec raid 8805 33
- The adaptec raid 8805 is a sas raid controller with these features 33
- About the adaptec raid 8885 8885q 34
- Mini sas hd x4 sff 8644 connectors external 34
- The adaptec raid 8885 8885q is a sas raid controller with these features 34
- About the adaptec raid 81605zq 35
- The adaptec raid 81605zq is a sas raid controller with these features 35
- Cables 36
- Choosing a raid level 36
- Disk drives 36
- Getting started 36
- Selecting disk drives and cables 36
- Replacing the full height bracket with a low profile bracket 38
- Basic installation steps 39
- Installation options 39
- Installing on an existing operating system 40
- Installing with an operating system 40
- Before you begin 41
- Installing a raid controller without zero maintenance cache protection 41
- Installing the controller 41
- Installing the controller and disk drives 41
- Installing a raid controller with zero maintenance cache protection 42
- Connecting disk drives to your controllers 45
- Connecting drives directly to the controller 45
- Connecting drives to a system backplane 45
- Connecting solid state drives ssds 46
- Connecting external devices 47
- Next steps 47
- Creating a bootable array 48
- Creating an array 48
- Creating an array with the arc utility 48
- Setting the boot controller 48
- Creating an array with maxview storage manager 49
- Making your array bootable 51
- Before you begin 52
- Creating a driver disk 52
- Installing the driver and an operating system 52
- Installing with red hat linux 5 or cent os 5 53
- Installing with red hat linux 6 cent os 6 or fedora linux 53
- Installing with windows 53
- Red hat linux 6 cent os 6 with dynamic kernel module support 53
- Red hat linux 6 cent os 6 fedora linux without dynamic kernel module support 54
- Installing with debian linux 55
- Installing with suse linux enterprise server 55
- Installing with ubuntu linux 56
- Installing with solaris 57
- Installing with freebsd 58
- Installing with vmware esx 4 58
- Installing with vmware esxi 5 x 59
- G change the vendor and acceptance level of the new image profile vmware esxi 5 61
- H check if the new driver package is available 61
- I add the scsi aacraid software package to the new image profile vmware esxi 5 61
- J export the custom iso image vmware esxi 5 61
- Vmware esxi 5 61
- You should see a line like this 61
- Installing with citrix xenserver 62
- Before you begin 63
- Creating a driver disk 63
- Installing on windows 63
- Installing the driver on an existing operating system 63
- Installing on debian linux 64
- Installing on red hat cent os suse or fedora linux 64
- Installing on ubuntu linux 64
- Installing on solaris 65
- Installing on freebsd 66
- Installing on vmware 66
- Installing on citrix xenserver 67
- About maxview storage manager 68
- About the adaptec raid configuration utility 68
- About the adaptec raid controller configuration utility 68
- Installing maxview storage manager 68
- Managing your storage space 68
- About the adaptec flash utility 69
- Which utility should i use 69
- Monitoring disk drives status 70
- Recovering from a disk drive failure 70
- Silencing the alarm 70
- Solving problems 70
- Troubleshooting checklist 70
- Disk drive failure in a raid 0 array 71
- Failed disk drive not protected by a hot spare 71
- Failed disk drive protected by a hot spare 71
- Failure in multiple arrays simultaneously 71
- Multiple failures in the same array 71
- Failed ssd in maxcache container 72
- Resetting the controller 72
- A introduction to sas 73
- How do sas devices communicate 73
- Terminology used in this appendix 73
- What is sas 73
- What s a phy 74
- What s a sas address 74
- What s a sas port 74
- Direct attach connections 75
- How are disk drives identified in sas 75
- What are the sas connection options 75
- What do sas cables look like 75
- What s a sas connector 75
- Backplane connections 76
- Sas expander connections 76
- How is sas different from parallel scsi 77
- In summary although sas and parallel scsi both use the scsi command set how they move data from one place to another is very different to support point to point serial data transport sas introduces new types of connectors cables connection options and terminology generally speaking sas is faster and more flexible than parallel scsi and provides more options for building your storage space sas lets you mix sas and sata disk drives together and lets you connect many many more devices this table describes many of the main differences between the two interfaces 77
- A drive segment is a disk drive or portion of a disk drive that is used to create an array a disk drive can include both raid segments segments that are part of an array and available segments each segment can be part of only one logical device at a time if a disk drive is not part of any logical device the entire disk is an available segment 78
- An array with raid 0 includes two or more disk drives and provides data striping where data is distributed evenly across the disk drives in equal sized sections however raid 0 arrays do not maintain redundant data so they offer no data protection compared to an equal sized group of independent disks a raid 0 array provides improved i o performance drive segment size is limited to the size of the smallest disk drive in the array for instance an array with two 250 gb disk drives and two 400 gb disk drives can create a raid 0 drive segment of 250 gb for a total of 1000 gb for the volume as shown in this figure 78
- B understanding raid 78
- Non redundant arrays raid 0 78
- Understanding drive segments 78
- When you create arrays or logical drives you can assign a raid level to protect your data each raid level offers a unique combination of performance and redundancy raid levels also vary by the number of disk drives they support this appendix describes the raid levels supported by your adaptec raid controller and provides a basic overview of each to help you select the best level of protection for your data storage 78
- Raid 1 arrays 79
- Raid 1 enhanced arrays 79
- A raid 10 array is built from two or more equal sized raid 1 arrays data in a raid 10 array is both striped and mirrored mirroring provides data protection and striping improves performance drive segment size is limited to the size of the smallest disk drive in the array for instance an array with two 250 gb disk drives and two 400 gb disk drives can create two mirrored drive segments of 250 gb for a total of 500 gb for the array as shown in this figure 80
- Raid 10 arrays 80
- A raid 5 array is built from a minimum of three disk drives and uses data striping and parity data to provide redundancy parity data provides data protection and striping improves performance parity data is an error correcting redundancy that s used to re create data if a disk drive fails in raid 5 arrays parity data represented by ps in the next figure is striped evenly across the disk drives with the stored data drive segment size is limited to the size of the smallest disk drive in the array for instance an array with two 250 gb disk drives and two 400 gb disk drives can contain 750 gb of stored data and 250 gb of parity data as shown in this figure 81
- Raid 5 arrays 81
- A raid 5ee array also known as a hot space is similar to a raid 5 array except that it includes a distributed spare drive and must be built from a minimum of four disk drives unlike a hot spare a distributed spare is striped evenly across the disk drives with the stored data and parity data and can t be shared with other logical disk drives a distributed spare improves the speed at which the array is rebuilt following a disk drive failure a raid 5ee array protects your data and increases read and write speeds however capacity is reduced by two disk drives worth of space which is for parity data and spare data in this figure s represents the distributed spare p represents the distributed parity data 82
- Raid 5ee arrays 82
- A raid 50 array is built from six to forty eight disk drives configured as two or more raid 5 arrays and stripes stored data and parity data across all disk drives in both raid 5 arrays for more information see raid 5 arrays on page 81 the parity data provides data protection and striping improves performance raid 50 arrays also provide high data transfer speeds drive segment size is limited to the size of the smallest disk drive in the array for example three 250 gb disk drives and three 400 gb disk drives comprise two equal sized raid 5 arrays with 500 gb of stored data and 250 gb of parity data the raid 50 array can therefore contain 1000 gb 2 x 500 gb of stored data and 500 gb of parity data in this figure p represents the distributed parity data 83
- Raid 50 arrays 83
- A raid 6 array also known as dual drive failure protection is similar to a raid 5 array because it uses data striping and parity data to provide redundancy however raid 6 arrays include two independent sets of parity data instead of one both sets of parity data are striped separately across all disk drives in the array raid 6 arrays provide extra protection for your data because they can recover from two simultaneous disk drive failures however the extra parity calculation slows performance compared to raid 5 arrays raid 6 arrays must be built from at least four disk drives maximum stripe size depends on the number of disk drives in the array 84
- Comparing raid levels 84
- Raid 6 arrays 84
- Raid 60 arrays 84
- Similar to a raid 50 array see raid 50 arrays on page 83 a raid 60 array also known as dual drive failure protection is built from eight disk drives configured as two or more raid 6 arrays and stripes stored data and two sets of parity data across all disk drives in both raid 6 arrays two sets of parity data provide enhanced data protection and striping improves performance raid 60 arrays also provide high data transfer speeds 84
- Use this table to select the raid levels that are most appropriate for the logical drives on your storage space based on the number of available disk drives and your requirements for performance and reliability 84
- Disk drive usage read performance and write performance depend on the number of drives in the logical drive in general the more drives the better the performance 85
- C using the adaptec raid configuration utility 86
- Ctrl a or uefi hii 86
- Introduction to the arc utility 86
- Running the arc utility 86
- Creating a new array 87
- Creating bootable arrays 87
- Managing existing arrays 87
- Using the arc utility to create and manage arrays 87
- Modifying cache settings 88
- Modifying power management settings 88
- Initializing disk drives 89
- Rescanning disk drives 89
- Secure erasing disk drives 89
- Stopping a secure erase 89
- Uninitializing disk drives 89
- Converting a jbod into a simple volume 90
- Creating a new jbod 90
- Creating and managing jbods 90
- Managing existing jbods 90
- Managing global hot spares 90
- Managing the maxcache pool 90
- Applying changes and exiting 91
- General controller settings 91
- Modifying your controller s configuration 91
- Opening the controller settings tool 91
- Using the arc utility to modify controller settings 91
- Note when the alarm is turned off disabled it will remain off after a reboot 92
- Note with the default ibpi setting the firmware sends a sgpio backplane_type signal if it recognizes that a 92
- Sgpio backplane is connected if any connected sgpio backplane does not support the backplane_type signal or it does not support the ibpi protocol you can manually set the backplane mode to sgpio 92
- Power management settings 93
- Clearing the controller cache 94
- Enabling and disabling controller cache preservation 94
- Preserving the controller cache 94
- Checking backup unit status 95
- Checking the cache preservation status 95
- Formatting and verifying disk drives 95
- Identifying disk drives 95
- Locating disk drives 95
- Setting the drive write cache policy 96
- Updating the controller firmware 96
- Creating a support archive 97
- Updating the controller cpld 97
- Viewing the event log 97
- Before you begin 98
- Compatibility notes 98
- Creating the firmware update disk 98
- D using the adaptec flash utility 98
- Obtaining the firmware 98
- Running the menu based afu 98
- System requirements 98
- Afu commands 99
- Running the afu from the command line 99
- Update 100
- Command is 101
- Command is as follows 101
- Command restart your computer the command syntax for th 101
- Compares the contents of each of the flash components on a raid controller to the corresponding image in a ufi file and indicates whether they match after using the verify command you must restart the computer the command syntax for th 101
- Displays a summary o 101
- Displays version information about the flash components on a raid controller after using th 101
- For example 101
- Functions and command switches 101
- This example displays version information about all supported raid controllers 101
- This example shows a typical system response after a verify command 101
- Verify 101
- Version 101
- Updating the flash using the afu command line 102
- Adaptec raid 6405 6445 activity led header connector molex 22 43 6030 or equivalent activity led header mating cable connector molex 22 55 2161 or equivalent j2 103
- Adaptec raid 6405 6445 aggregate activity led board connector molex 22 28 4023 or equivalent aggregate led mating cable connector molex 50 57 9002 or equivalent j1 103
- Adaptec raid 6405 6445 external alarm connector molex 22 28 4023 or equivalent alarm mating cable connector molex 50 57 9002 or equivalent j12 103
- Adaptec raid 6405 6445 i2c cn0 board connector molex 22 43 6030 or equivalent i2c mating cable connector molex 22 43 3030 or equivalent j4 103
- Adaptec raid 6405 6445 led and i2c connector specification 103
- E controller led i2c and alarm connector quick reference 103
- This appendix provides a reference guide for adaptec raid controller activity led connectors i2c connectors and external alarm connectors 103
- Adaptec raid 6805 6805q activity led header connector molex 22 43 6030 or equivalent activity led header mating cable connector molex 22 55 2161 or equivalent j2 104
- Adaptec raid 6805 6805q aggregate activity led board connector molex 22 28 4023 or equivalent aggregate led mating cable connector molex 50 57 9002 or equivalent j1 104
- Adaptec raid 6805 6805q external alarm connector molex 22 28 4023 or equivalent alarm mating cable connector molex 50 57 9002 or equivalent j12 104
- Adaptec raid 6805 6805q led and i2c connector specification 104
- Adaptec raid 6405e activity led header connector molex 22 43 6030 or equivalent activity led header mating cable connector molex 22 55 2161 or equivalent j2 105
- Adaptec raid 6405e aggregate activity led board connector molex 22 28 4023 or equivalent aggregate led mating cable connector molex 50 57 9002 or equivalent j1 105
- Adaptec raid 6405e led connector specification 105
- Adaptec raid 6805 6805q i2c cn0 board connector molex 22 43 6030 or equivalent i2c mating cable connector molex 22 43 3030 or equivalent j4 105
- Adaptec raid 6805 6805q i2c cn1 board connector molex 22 43 6030 or equivalent i2c mating cable connector molex 22 43 3030 or equivalent j5 105
- Adaptec raid 6405e external alarm connector molex 22 28 4023 or equivalent alarm mating cable connector molex 50 57 9002 or equivalent j12 106
- Adaptec raid 6805e 6805e r5 activity led header connector molex 22 43 6030 or equivalent activity led header mating cable connector molex 22 55 2161 or equivalent j2 106
- Adaptec raid 6805e 6805e r5 aggregate activity led board connector molex 22 28 4023 or equivalent aggregate led mating cable connector molex 50 57 9002 or equivalent j1 106
- Adaptec raid 6805e 6805e r5 led connector specification 106
- Asr 6805e r5 bulk 2275600 r 106
- Adaptec raid 6405t activity led header connector molex 22 43 6030 or equivalent activity led header mating cable connector molex 22 55 2161 or equivalent j2 107
- Adaptec raid 6405t aggregate activity led board connector molex 22 28 4023 or equivalent aggregate led mating cable connector molex 50 57 9002 or equivalent j1 107
- Adaptec raid 6405t external alarm connector molex 22 28 4023 or equivalent alarm mating cable connector molex 50 57 9002 or equivalent j12 107
- Adaptec raid 6405t led connector specification 107
- Adaptec raid 6805e 6805e r5 external alarm connector molex 22 28 4023 or equivalent alarm mating cable connector molex 50 57 9002 or equivalent j12 107
- Adaptec raid 6805t 6805tq led connector specification 107
- Adaptec raid 6805t 6805tq activity led header connector molex 22 43 6030 or equivalent activity led header mating cable connector molex 22 55 2161 or equivalent j2 108
- Adaptec raid 6805t 6805tq external alarm connector molex 22 28 4023 or equivalent alarm mating cable connector molex 50 57 9002 or equivalent j12 108
- Adaptec raid 7805 7805q 71605 71605q 71605e alarm connector specification 108
- Adaptecraid6805t 6805tqaggregateactivityledboardconnector molex22 28 4023orequivalent aggregate led mating cable connector molex 50 57 9002 or equivalent j1 108
- Adaptec raid 71685 72405 78165 alarm connector specification 109
- Adaptec raid 71685 72405 78165 external alarm connector molex 22 28 4023 or equivalent alarm mating cable connector molex 50 57 9002 or equivalent j6 109
- Adaptec raid 7805 7805q 71605 71605q 71605e external alarm connector molex 22 28 4023 or equivalent alarm mating cable connector molex 50 57 9002 or equivalent j6 109
- Electrostatic discharge esd 110
- F safety information 110
- A 3 vdc 1 a 12 vdc adaptec raid 71605 71605q 111
- A 3 vdc 1 a 12 vdc adaptec raid 71605e 111
- A 3 vdc 1 a 12 vdc adaptec raid 71685 111
- A 3 vdc 1 a 12 vdc adaptec raid 72405 111
- A 3 vdc 1 a 12 vdc adaptec raid 7805 7805q 111
- A 3 vdc 1 a 12 vdc adaptec raid 78165 111
- A 3 vdc 1 a 12 vdc adaptec raid 81605zq 111
- A 3 vdc 1 a 12 vdc adaptec raid 8405 111
- A 3 vdc 1 a 12 vdc adaptec raid 8805 111
- A 3 vdc 1 a 12 vdc adaptec raid 8885 8885q 111
- Current requirements 111
- Dc power requirements 111
- Environmental specifications 111
- G technical specifications 111
- Note adaptec raid controllers require adequate airflow to operate reliably the recommended airflow is 200 lfm linear feet per minute minimum forced airflow is required 111
- Note ambient temperature is measured 1 from the raid processor 111
- Pmc sierra inc 1380 bordeaux drive sunnyvale ca 94089 usa 117
Похожие устройства
- Aerocool AC220-BW Инструкция по эксплуатации
- Aerocool AC120-BO Инструкция по эксплуатации
- Aerocool AC120-BR Инструкция по эксплуатации
- Aerocool AC120-BB Инструкция по эксплуатации
- Aerocool AC120-BW Инструкция по эксплуатации
- Aerocool AC120-B Инструкция по эксплуатации
- Aftershokz sportz titanium, as401lr Инструкция по эксплуатации
- Aftershokz sportz titanium, as401ob Инструкция по эксплуатации
- Aftershokz sportz titanium, as401xb Инструкция по эксплуатации
- Aftershokz sportz titanium с микрофоном, as451lr Инструкция по эксплуатации
- Aftershokz sportz titanium с микрофоном, as451ob Инструкция по эксплуатации
- Aftershokz sportz titanium с микрофоном, as451xb Инструкция по эксплуатации
- Aftershokz trekz titanium, черно-зеленые, as600ig Инструкция по эксплуатации
- Aftershokz trekz titanium, черно-голубые, as600ob Инструкция по эксплуатации
- Aftershokz trekz titanium, черные, as600sg Инструкция по эксплуатации
- Aftershokz bluez 2s, as500s Инструкция по эксплуатации
- Aftershokz bluez 2s, as500sr Инструкция по эксплуатации
- Aftershokz bluez 2s, as500sn Инструкция по эксплуатации
- Airline X5, CA-050-16S Инструкция по эксплуатации
- Airline гидравлический бутылочный 2т, AJ-B-02 Инструкция по эксплуатации
Скачать
Случайные обсуждения