IKRA Mogatec BRM 1446 S [19/80] Gb operating instruction

IKRA Mogatec BRM 1446 S [19/80] Gb operating instruction
7
GB | Operating Instruction
4. Then rotate the lever toward „II“ until the desired
speed is reached (g. 9).
illustration 9
Off
II
Operation
Starting
I
Slow Fast
5. Release the brake control handle can stop the engine
and blade.
6. Both hands holding the handle and maintain can nor-
mal operation (Fig. 10).
illustration 10
STOP THE ENGINE AND MACHINE
Release the break control handle to stop the engine and
blade, thus stopping the lawnmower from operating.
DRIVE THE WHEEL
SELF-DRIVE: grasp the wheel drive handle bar and the
unit will move forward by the engine. (Fig. 10)
PUSH THE MACHINE BY MANUAL: Release the wheel
drive handle bar, and then you can push the unit manual.
Stop the engine before emptying the grass cat-
cher or before you change the cutting height.
GRASS CATCHER
Empty and clean the bag, make sure it is clean and ensu-
re its meshwork is ventilated.
CUTTING HEIGHT ADJUSTMENT
illustration 11
Apply outward pressure to disengage lever from rack,
move lever forward or back to adjust height (Fig. 11).
3. MAINTENANCE, CLEANING AND
STROAGE
WARNING!
Stop the engine and unplug the spark plug before
any repairing or maintenance operations
Refer to separate engine manual for engine mainte-
nance instructions.
Stop the engine and unplug the spark plug before any
repairing or maintenance operations.
For four strokes engine read carefully the maintenance
engine manual. Check regularly the oil level and add
some oil or replace it if necessary.
Frequently check the lawnmower and ensure that all
grass deposits are removed from beneath the deck.
Lubricate regularly the wheel axle and the bearings
with grease.
Check often the blade, in order to obtain a clean work
the blade should always be sharp and well balance.
At regularly intervals check the tightening of all bolts
and screws. Wear off or badly tightening nuts and bolts
can involve some important damages to the engine or
the frame.
If the blade hits violently an obstacle, stop the lawnmo-
wer and bring it to agreed service station.
THE BLADE: The blade is made of pressed steel, in or-
der to obtain a clean work sharpen the blade frequently,
around every 25 hours of work. Be sure that the blade is
always well balance.
YOU MUST ONLY USE THE MANUFACTURER BALDE
IT SHOULD BE REFERENCED AND WEAR THE MA-
NUFACTURER BRAND “BRM 1446 S”!

Содержание

Скачать