Hyundai H-CCR8088 (Без CD) [12/39] Operation operation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Hyundai H-CCR8088 (Без CD) [12/39] Operation operation

Hyundai H-CCR8088 (Без CD) [12/39] Operation operation
12 13
Operation Operation
buttons to choose ST. Press VOL+/VOL-
buttons on the RC or rotate VOLUME regulator
on the panel to select between ST STEREO/
MONO. STEREO means stereo reception
of the signal; MONO means mono reception
mode. Or press STEREO button on the RC to
switch stereo reception on/off. Improvement
of reception of distant stations can be done
by selecting mono mode, which may cut down
some reception noise.
RDS function (in FM radio mode)
RDS (Radio Data System) service availability
varies with areas. Please understand if RDS
service is not available in you area, the
following service is not available, either.
AF (Alternative Frequencies)
Press AF button on the panel to turn the AF
function on or off. When the function is on but no
RDS information is received, the AF symbol will
blink on the display. When RDS information is
received, the AF symbol will be displayed stably.
When the radio signal strength is poor,
enabling the AF function will allow the unit to
automatically search another station with the
same PI (Program Identification) as the current
station but with a stronger signal, so that you
do not have to retune the stations when driving
between different transmitter coverage areas.
PS (Program Service name): the name of
station will be display instead of frequency.
If RDS service is not available in your area,
turn off the AF mode.
TA (Traffic Alarm)
Press TA button on the panel to turn TA
function on or off. When on, the TA symbol will
be shown on the display.
In TA mode traffic program will be
automatically searched, until the program
is received. When traffic announcement is
received the unit will temporarily switch to the
tuner mode (regardless of the current mode)
and begin broadcasting the announcement.
After the traffic announcement is over, it will
return to the previous mode and volume level.
To interrupt traffic announcement press TA
button shortly; it will not switch off the TA mode.
PTY (Program Type)
This radio will allow you to select the type of
program required, and will search for a station
broadcasting that type of program.
Press PTY/
button to show News
program type. Rotate VOLUME regulator
on the panel or press VOL+/VOL- buttons
on the RC to select a program type: News,
Affairs, Info, Sport, Educate, Drams, Culture,
Science, Varied, Pop, Rock, Easy, Light M,
Classic, Other, Weather, Finance, Children,
Social, Religion, Phone, Travel, Leisure, Jazz,
Country, Nation, Oldies, Folk, Document.
When PTY program type is selected, the
radio starts to search corresponding PTY
information, and stops if the corresponding
PTY information is detected. During 1 loop, if
desired PTY is not found, the unit will return to
previous mode.
Press PTY/
button to switch the PTY
function off.
Other parameter setting
Press and hold SELECT button on the panel
or SEL button on the RC until the display
shows setting menu. Press UP/DOWN cursor
buttons to choose the needed parameter.
Press VOL+/VOL- buttons on the RC or rotate
VOLUME regulator on the panel to choose the
needed option. After choosing, please leave
the unit idle to activate.
• RETUNE S/L: RETUNE refers to the time
period the unit allows for radio scan when
reception is interrupted. S represents a short
time period and L represents a long time period.
• MASK DPI/ALL: During MASK DPI mode,
the unit will mask only the AF which has
different PI, this is the default mode; during
MASK ALL mode, the unit will mask the AF
which has different PI and no RDS signal with
high field strength.
• TA ALARM/TA SEEK: In TA SEEK mode,
the unit will seek for traffic announcement
program; in TA ALARM mode the alarm is set off.

Содержание

Похожие устройства

Скачать