![Sony SLV-E480EG [3/60] Warning](/img/pdf.png)
Sony SLV-E480EG [3/60] Warning
![Sony SLV-E480EG [3/60] Warning](/views2/1029754/page3/bg3.png)
Introduction
2
WARNING
To prevent fire or shock hazard, do not expose
the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified personnel
only.
The mains lead must be changed only at a
qualified service shop.
Precautions
Safety
• This unit operates on 220 – 240 V AC, 50 Hz.
Check that the unit’s operating voltage is
identical with your local power supply.
• If anything falls into the cabinet, unplug the
unit and have it checked by qualified
personnel before operating it any further.
• The unit is not disconnected from the mains
as long as it is connected to the mains, even
if the unit itself has been turned off.
• Unplug the unit from the mains if you do
not intend to use it for an extended period of
time. To disconnect the lead, pull it out by
the plug, never by the lead.
Installing
• Allow adequate air circulation to prevent
internal heat buildup.
• Do not place the unit on surfaces (rugs,
blankets, etc.) or near materials (curtains,
draperies) that may block the ventilation
slots.
• Do not install the unit near heat sources
such as radiators or air ducts, or in a place
subject to direct sunlight, excessive dust,
mechanical vibration or shock.
• Do not install the unit in an inclined
position. It is designed to be operated in a
horizontal position only.
• Keep the unit and cassettes away from
equipment with strong magnets, such as
microwave ovens or large loudspeakers.
• Do not place heavy objects on the unit.
• If the unit is brought directly from a cold to
a warm location, moisture may condense
inside the VCR and cause damage to the
video head and tape. When you first install
the unit, or when you move it from a cold to
a warm location, wait for about one hour
before operating the unit.
Caution
Television programmes, films, video tapes and
other materials may be copyrighted.
Unauthorized recording of such material may
be contrary to the provisions of the copyright
laws. Also, use of this recorder with cable
television transmission may require
authorization from the cable television
transmitter and/or programme owner.
Compatible colour systems
• This VCR is designed to record and play
back using the PAL and MESECAM colour
systems (TV systems B/G and D/K) and
play back using the NTSC 4.43 colour
system. Recording of video sources based
on other colour systems cannot be
guaranteed.
• Tapes recorded with the NTSC colour
system can be played back on this unit using
a TV or a colour monitor for the PAL colour
system.
Содержание
- E f g h i j k 1
- T u v w x y z 1
- Operating instructions 2
- Slv e480eg slv e477eg slv e380eg 2
- Video cassette recorder 2
- Caution 3
- Compatible colour systems 3
- Installing 3
- Introduction 3
- Precautions 3
- Safety 3
- Warning 3
- Additional information 4
- Additional operations 4
- Basic operations 4
- Getting started 4
- Table of contents 4
- Checking your model name 5
- Step 1 5
- Unpacking 5
- Inserting the batteries 6
- Setting up the remote commander 6
- Step 2 6
- Using the remote commander 6
- Step 2 setting up the remote commander continued 7
- Tv control buttons 7
- Additional connection 8
- Connecting the vcr 8
- Step 3 8
- Step 4 9
- Tuning your tv to the vcr 9
- Setting up the vcr with the auto set up function 11
- Step 5 11
- Setting the clock 13
- Setting the clock manually 13
- Step 6 13
- Press ok 15
- Step 6 setting the clock continued 15
- Changing the station for the auto clock set function slv e380eg only 16
- Getting started 16
- Press to select on 16
- The cursor is on auto adjust 16
- To select clock and press ok 16
- To select settings and press ok 16
- Step 6 setting the clock continued 17
- Manual setup selecting a language 18
- Manual setup presetting channels 19
- Getting started 20
- If you know the number of the channel you want press the programme number buttons for example for channel 5 first press 0 and then press 5 20
- Press prog to select the programme position 20
- Press repeatedly until the channel you want is displayed 20
- The channels appear in the following order 20
- To move the cursor to system then select b g or d k so that you get the better sound 20
- Disabling unwanted programme positions 21
- If the picture is not clear 21
- Manual setup presetting channels continued 21
- Manual setup setting up showview 22
- Slv e480eg e380eg only 22
- Manual setup setting up showview continued 23
- Setting up showview for satellite broadcasts 23
- Insert a tape 25
- Playing a tape 25
- Press æ play 25
- The vcr turns on and starts playing automatically if you insert a tape with its safety tab removed 25
- Turn on your tv and set it to the video channel 25
- When the tape reaches the end it will rewind automatically 25
- Additional tasks 26
- Basic operations 26
- During playback press replay up to four times the vcr rewinds the tape about 10 seconds on the counter for each press of the button and restarts playback 26
- To display the counter on the tv screen press display 26
- To play an ntsc recorded tape set ntsc pb at the rear of the vcr according to the colour system of your tv 26
- To replay a recently watched scene you can immediately rewind and playback the scene you want to watch again 26
- To use the time counter at the point on the tape that you want to find later press counter reset the counter in the display window resets to 0 00 00 search for the point afterwards by referring to the counter 26
- Playing a tape continued 27
- Basic operations 28
- Insert a tape with its safety tab in place 28
- Press input select until a programme position number appears in the display window 28
- Recording tv programmes 28
- Turn on your tv and set it to the video channel 28
- Recording tv programmes continued 29
- Recording tv programmes continued 31
- Basic operations 32
- Before you start check that the vcr clock is set to the correct time insert a tape with its safety tab in place make sure the tape is longer than the total recording time 32
- Just enter the programme s showview number listed in the tv programme guide the date times and programme position of that programme are set automatically you can preset up to eight programmes at a time 32
- Press showview 32
- Recording tv programmes using showview 32
- Slv e480eg e380eg only 32
- Recording tv programmes using showview continued 33
- Recording tv programmes using showview continued 35
- Setting the timer manually 36
- Setting the timer manually continued 37
- Basic operations 38
- Reset the counter display tape information on the tv screen check the timer settings watch another tv programme 38
- Timer recording with vps pdc signals slv e380eg only the broadcast systems transmit vps video programme system or pdc programme delivery control signals with their tv programmes these signals ensure that your timer recordings are made regardless of broadcast delay early starts or broadcast interruptions 38
- To change the indication in reverse order 38
- To use the vps pdc function set vps pdc to on you can also use the vps pdc function for a source connected to the line 1 tv connector 38
- You can also do the following tasks while the vcr is recording 38
- Playing searching at various speeds 39
- Press æ play 39
- To resume normal playback 39
- During playback or pause turn the click shuttle ring clockwise or counterclockwise each change in the click shuttle ring position changes the playback mode in the following way 40
- Using the click shuttle ring slv e380eg only 40
- With the click shuttle ring you can operate a variety of playback options 40
- Recording tv programmes using the quick timer 41
- Using the quick timer during stop mode 41
- Before you start turn on your tv and set it to the video channel 42
- Checking changing cancelling timer settings 42
- If you do not need to change or cancel the settings press ok then turn off the vcr to return to recording standby 42
- If you want to change a setting go on to the next step 42
- Press on standby to turn on the vcr 42
- To select list and press ok 42
- To select the setting you want to change or cancel then press ok 42
- Checking changing cancelling timer settings continued 43
- About optimum picture control opc 44
- Adjusting the picture 44
- Adjusting the tracking 44
- Changing menu options 45
- Other options 46
- Video options 46
- Connecting to record on this vcr 47
- Editing with another vcr 47
- Operation when recording on this vcr 47
- To stop editing press the p stop buttons on both vcrs 48
- Symptoms caused by contaminated video heads 49
- Troubleshooting 49
- Troubleshooting continued 51
- Additional information 52
- General 52
- Inputs and outputs 52
- Specifications 52
- Supplied accessories 52
- System 52
- 2 3 5 4 53
- 9 8 7 6 53
- Front panel slv e480eg e477eg 53
- Index to parts and controls 53
- 2 3 4 5 6 54
- Front panel slv e380eg 54
- 2 3 4 5 6 55
- Display window 55
- Index to parts and controls continued 55
- Rear panel 56
- 2 3 4 5 57
- Index to parts and controls continued 57
- Remote commander 57
Похожие устройства
- Makita 9558 NB Инструкция по эксплуатации
- Olympus C-2 Zoom Инструкция по эксплуатации
- Levenhuk 850B бинокуляр Инструкция по эксплуатации
- Makita GA 9020 Инструкция по эксплуатации
- Sony SLV-E180EG Инструкция по эксплуатации
- Scarlett SC-2152 Инструкция по эксплуатации
- Sony SLV-E180EE Инструкция по эксплуатации
- Xoro HSD 304 Инструкция по эксплуатации
- Makita GA9020 SF Инструкция по эксплуатации
- Levenhuk 870T тринокуляр Инструкция по эксплуатации
- Sony SLV-AV100UX Инструкция по эксплуатации
- Zanussi ZDS 699 Инструкция по эксплуатации
- Makita 9555 HN Инструкция по эксплуатации
- Levenhuk D870T тринокуляр Инструкция по эксплуатации
- Sony SLV-795HF Инструкция по эксплуатации
- Samsung WF6520S9C Инструкция по эксплуатации
- Levenhuk Rainbow 2L Blue Инструкция по эксплуатации
- Makita GD 0800 C Инструкция по эксплуатации
- Rolsen C21SR74S Инструкция по эксплуатации
- Sony SLV-761HF Инструкция по эксплуатации
Скачать
Случайные обсуждения