InFocus IN1116 [9/36] Displaying an image

Displaying an image

Press the Power button.

The Power LED blinks green, and the fans start to run. When the lamp comes on,

the start up screen displays and the Power LED turns solid green. It can take up to

a minute for the image to achieve full brightness. Note: When the feature, AC

Power On, is enabled, the projector automatically turns on when power is

connected. This allows control of ceiling mounted projectors with a wall power

switch.

No start up screen? Get help on page 12.

Turn on your computer or video device.

The image should appear on the projection screen. If it doesn’t, press the Source

button on the projector’s keypad or remote.

If you are using a VGA cable to connect your computer to the projector:

If using a laptop, make sure its external video port is active.

Many laptops do not automatically turn on their external video port when a

projector is connected. Usually a key combination like FN + F8 or CRT/LCD key

turns the external display on and off. Locate a function key labeled CRT/LCD or a

function key with a monitor symbol. Press FN and the labeled function key

simultaneously.

Refer to your laptop's documentation for more information about your laptop's

key combination.

No laptop image? Try pressing the Auto Image button on the remote. Get

help on

page 12.

press Power button

turn on computer or

video device

activate laptop’s external port

monitor key or

LCD/CRT key

FN key