Falmec Dora ANG 100 (600) S [18/68] Filters

Falmec Iris Tulip 120 (600) S [18/68] Filters
16
SPEED - Switch B
This is used to start and set the speed of the motor, from 1 to 3, or with continuous speed
variator, depending on the version.
LIGHT - C
Motor operation indicator light.
2. FIVE BUTTON CONTROL PANEL
LIGHT- button
Pressed: the light is on
Released: the light is off
MOTOR button - 1, 2, 3, OFF
1: starts the motor at minimum speed
2: starts the motor at medium speed
3: starts the motor at maximum speed
OFF: stops the motor
FILTERS REMOVING AND REPLACING’S INSTRUCTIONS
H
1. METAL FILTERS
To remove the metal grease-trapping filter, simply pull the handle A until releasing it from
the front guide; then tilt it slightly downwards, and slide it out of the rear guide. To reposi-
tion the filter, repeat the operation in the reverse order.
A
2. CHARCOAL FILTERS
To replace the charcoal filters, proceed as follows: remove the metal filters as described
above. The two filters located at the ends of the motor can now be easily accessed.
To install the new fi lters see picture.
In case of hood with the motor box the fi lter is located on the botton part of the motor box.
To install the new fi lters see picture.
To order new charcoal fi lters contact the distributor/retailer.
VALID ONLY FOR ITALY: download the appropriate order form from: www.falmec.com (access
the assistance drop-down menu).

Содержание

Похожие устройства

SPEED Switch B This is used to start and set the speed of the motor from 1 to3 or with continuous speed variator depending on the version LIGHT C Motor operation indicator light 2 FIVE BUTTOI CONTROL PANEL LIGHT button Pressed the light is on Released the light is off MOTOR button 1 2 3 OFF 1 starts the motor at minimum speed 2 starts the motor at medium speed 3 starts the motor at maximum speed OFF stops the motor OFF 1 2 3 H I FILTERS REMOVING AND REPLACING S INSTRUCTIONS 1 METAL FILTERS To remove the metal grease trapping filter simply pull the handle A until releasing it from the front guide then tilt it slightly downwards and slide it out of the rear guide To reposition the filter repeat the operation in the reverse order A 2 CHARCOAL FILTERS To replace the charcoal filters proceed as follows remove the metal filters as described above The two filters located at the ends of the motor can now be easily accessed To install the new filters see picture In case of hood with the motor box the filter is located on the botton part of the motor box To install the new filters see picture To order new charcoal filters contact the distributor retailer VALID ONLY FOR ITALY download the appropriate order form from www falmec com access the assistance drop down menu 16

Скачать