Castel MAC HC 40 NTV [5/18] Installation
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Castel MAC HC 40 NTV [5/18] Installation

Castel MAC HC 40 NTV [5/18] Installation
GB
2.1 Rating plate data
• Check that the rating plate data and the
electrical line characteristics correspond
(V, kW, Hz, n° of phases and power avail-
able ).
• The rating plate with the equipment’s
characteristics is applied to the outside
rear of the machine
and/or the electric pan-
els.
Any preparation
of just machines for the
deployment of con-
densing units must follow the fire regula-
tions in force in the country of installation
(contact the local fire brigade for the due
instructions).
It must also be remembered that any cut-
in of the safety valves or fuse caps in the
refrigeration circuit involves the immedi-
ate dispersal of all the refrigerant into the
atmosphere.
2.2 Positioning
• The machine must be installed and test-
ed in full compliance with safety regula-
tions, traditional instructions and current
law.
• The installation engineer is required to
verify any fire-related prescriptions (con-
tact the local fire brigade for the due
instructions).
• Position the machine where it is required
• Level the equipment by means of the
adjustment feet. For the levelling of heav-
ier machines, use relevant lifting devices.
C
C
A
A
U
U
T
T
I
I
O
O
N
N
!
!
!
!
!
!
THIS OPERATION MUST ONLY BE
CARRIED OUT BY A
LICENSED INSTALLATION ENGINEER.
2. INSTALLATION
N.B.: all the various
packaging compo-
nents must be dis-
posed of according to
the regulations in
force in the Country
where the equipment
is to be used. Under
no circumstances
must anything be dumped where it is not
authorised.
1.5 Safety regulations
The responsibility for operations on the
machine, not taking due care to comply with
the instructions shown in this manual ,lies
with the user. Here below, you will find the
main safety regulations:
- do not touch the machine with damp
or wet hands or feet
- do not operate on the cell with bare
feet
- do not insert screwdrivers, kitchen
utensils or anything else between the
guards and the moving parts
- before carrying out cleaning or ordi-
nary maintenance operations, discon-
nect the machine from the power sup-
ply at the ON/OFF switch (if there is
one also disconnect the machineʼs
general knife switch)
- do not pull the power lead to discon-
nect the machine from the mains.

Содержание

Похожие устройства

Скачать