![Castel MAC HC 40 NTV Инструкция по эксплуатации онлайн [6/18] 272069](/img/pdf.png)
Castel MAC HC 40 NTV Инструкция по эксплуатации онлайн [6/18] 272069
![Castel MAC HC 40 NTV Инструкция по эксплуатации онлайн [6/18] 272069](/views2/1318627/page6/bg6.png)
6
GB
(fig.1)
• If the equipment are not level, it is possi-
ble that their functioning and the flow of
condensate will be compromised.
AVOID
• Places exposed to direct sunlight
• Closed, hot places with little air change
• Do not install the machine near any heat
source (fig.4).
2.3 Room temperature and air change
For air-cooled refrigeration groups, the
air temperature in the operating environ-
ment must not exceed 32°C.
The declared performance ratings are
not guaranteed over this temperature.
The machine can function safely up to
38°C.
Remote condensing units must be
installed in special rooms or outside in a
place not exposed to direct sunlight; if the
circumstances make it necessary, the
installer must assess whether to use a
cover or special roofing (the costs will be
met by the purchaser).
In any case, a sufficient air change must
be guaranteed.
2.4 Connection to the electricity mains.
Upline from every piece of equipment it is
essential to install a thermomagnetic dif-
ferential switch in accordance with the
regulations currently in force in the coun-
try or installation, complete with knife
switch.
• The electrical cables for connection must
comply with the characteristics shown in
the technical data (see the machine’s
wiring diagrams, to be done by the instal-
lation engineer)
The grounding wire must be correctly
connected to an efficient grounding sys-
tem.
THE MANUFACTURER DECLINES ALL
LIABILITY AND ALL WARRANTY
OBLIGATIONS IF DAMAGE TO THE
EQUIPMENT, INJURY TO PERSONS
OR DAMAGE TO PROPERTY
RESULTS FROM INCORRECT INSTAL-
LATION AND/OR INSTALLATION THAT
DOES NOT COMPLY WITH LOCAL
REGULATIONS.
CONNECTING THE APPLIANCE
TO THE POWER SUPPLY.
In the event of damage to the power sup-
ply cable on the appliance, have the cable
replaced only by a qualified electrician to
avoid any risk of personal injury.
Содержание
- Conservation cabinets 1
- Highcontrol 1
- Instructions for use 1
- General documentation 4
- General information 4
- Out fig for the stainless steel versions wear protective gloves when han dling the packaging and the wooden base 4
- Installation 5
- Accessories 8
- Hc 20 c nt ntv ntb btv fx 8
- Hc 20 nt 2 bt 2 btv 2 8
- Hc 40 btv ntb ntv 8
- Operating spaces 8
- Positioning 8
- Technical characteristics 9
- Date 12 04 03 time 11 54 23 11
- Hc20nt 2 hc20ntv hc20btv hc20btv 2 hc40ntv hc40btv 11
- Menu 2 change setpoint 11
- New set 15 c current 15 c 11
- Ok cell 21 c 11
- Call service 12
- Defrosting management 12
- F18 defr time s 19 02 02 06 09 12
- Menu 4 defrosting 12
- Ok cell 10 5 c 12
- Ok cell 18 c 12
- Al 27 high temp duration 015 13
- Al 27 high temp max temp 25 c 13
- Al 27 high temp s 18 03 02 12 29 13
- Alarm detected cell 24 0 c 13
- Ht cell 18 c 13
- Lt cell 24 c 13
- Management of the alarms detected and turning them off 13
- Al 26 black out b 15 03 02 10 22 14
- Al 26 black out max temp 12 c 14
- Al 26 black out s 15 03 02 10 01 14
- Alarm detected cell 24 0 c 14
- Button the cancellation is automatic when the mal function is rectified the alarm is however logged in the alarm menu 14
- Contact an authorised tecnomac centre in the case of a serious alarm 14
- Example of a blackout alarm 14
- Important 14
- In the case of high low temperature alarms before being registered a prealarm time of sixty minutes is calculated at the end of this time the controller logs the alarm in the alarm log and shows the following mask on the display 14
- Malfunctioning message they jeopardise machine operation call the service message display cause cancellation 14
- Serious alarm list serious alarms can determine the incorrect functioning of the conservator the display is the same as that described for the alarms and the signalling buzzer is acti vated to silence the buzzer press the 14
- To eliminate the indication go into the alarm log as shown in the paragraph above 14
- Alarm detected fixed logging of a remove the cause of the alarm alarm in the log and enter into menu 1 alarm log to reset the controller 15
- Ht fixed high temp prealarm automatic rectification 15
- List of any other malfunctions that cannot be signalled 15
- Lt fixed low temp prealarm automatic rectification 15
- Set clock loss of clock data set clock data 15
- Signalling messages they do not jeopardise the functioning of the machine message display cause cancellation 15
- Ordinary maintenance 16
Похожие устройства
- Castel MAC TC 60 N Инструкция по эксплуатации
- Castel MAC HC 20 BT Инструкция по эксплуатации
- Castel MAC HC 20 NTB Инструкция по эксплуатации
- Steno PL7B Инструкция по эксплуатации
- ТОРГМАШ УКМ-14 Инструкция по эксплуатации
- ТОРГМАШ УКМ-14 Сертификат
- ТОРГМАШ УКМ-14 Каталог оборудования ТОРГМАШ
- Pavoni MINITEMPER Инструкция по эксплуатации
- Pavoni MINITEMPER Каталог оборудования Pavoni (англ.)
- Castel MAC HC 20 C Инструкция по эксплуатации
- Talsa Н26pa Инструкция по эксплуатации
- Talsa H42pas Инструкция по эксплуатации
- Talsa Н31pas Инструкция по эксплуатации
- Talsa Н15pa Инструкция по эксплуатации
- Helia Smoker 48 Инструкция по эксплуатации
- Helia Smoker 48 Рецепты копчения
- Helia Smoker 24 Инструкция по эксплуатации
- Helia Smoker 24 Рецепты копчения
- CAS CNW-460 Инструкция по эксплуатации
- CAS СNW-520 Инструкция по эксплуатации