Waring JX40CE [3/24] Cleaning instructions

DISASSEMBLY-ASSEMBLY INSTRUCTIONS

IMPORTANT: Citrus Juicer should be unplugged from

outlet when disassembling or assembling

parts.

DISASSEMBLING: (SEE FIG. 1)

1. After removing your Citrus Juicer from the box,

familiarize yourself with the parts by disassembling

the unit while referring to FIG. 1.

2. Pull off Splash Hood (4000 series only),

Reamer and Strainer.

3. Lift Bowl off Motor Housing.

ASSEMBLING: (SEE FIG. 1)

1. Place Bowl on Motor Housing with spout facing front

and resting in notch of motor housing.

2. Place Strainer inside of Bowl.

3. Place Reamer on Drive Shaft, and push down

firmly to seat.

4. Put Splash Hood on top of Bowl (4000 series only).

CLEANING INSTRUCTIONS

Clean Juicer immediately after each use, and prior to initial use as follows:

1. UNPLUG POWER CORD.

2. Separate all removable parts according to disassembly instructions.

3. Rinse removable parts thoroughly under running water.

4. Wipe external surfaces of Motor Housing with a soft cloth or sponge, dampened

with water.

DO NOT IMMERSE MOTOR HOUSING IN WATER.

OPERATION

1. With power cord unplugged, assemble all parts per assembly instructions.

2. Plug power cord into appropriate electrical outlet.

3. Set the power switch to the ON (1) position, and allow a few seconds for motor to

reach full speed.

4. Place halved citrus fruit on rotating reamer, and push down firmly.

NOTE: Your juicer is equipped with a protective device which will interrupt power and

stop the motor if the juicer becomes overloaded or overheated for any reason. Should

this occur, perform the following steps in the indicated sequence:

1. Set the power switch to the OFF (0) position.

FIG. 1

Splash Hood

Reamer

Strainer

Bowl

Motor Housing