Prince Castle DHB2PT-20BCE [7/17] Programming the menus

Product Holding Bin

DHB2PT Series

Programming the Menus

Press and hold the PRINCE CASTLE LOGO button (on the

button bar) until all the displays show PROG and the PAN

buttons LEDs all glow RED.

A. Press the PAN button next to the display to be changed. The

LED will change from RED to YELLOW and the display will

change from PROG to the assigned product choice.

B. Press the UP or DOWN Arrow button to scroll to the desired product

choice.

C. Press the MENU/ENTER button to save the selection. All displays

will show PROG.

Press and hold the MENU/ENTER button. The display next to

the MENU/ENTER button will show the menu choices. Use the

UP or DOWN Arrow button to scroll through the 6 menus.

Release the MENU/ENTER button when the desired menu is

displayed.

When the MENU/ENTER button is released, all

displays will again show PROG.

A. Repeat Steps 2 and 3 as required.

B. Press the PRINCE CASTLE LOGO button to exit the

Program Mode and return to the Run Mode.

NOTE: Up to six items (one for each menu) may be

programmed for each PAN button. A pan may be set as “not

used” by assigning “--- -” as its product.

Changing the Hold and Cook-More Times

A. The SET PRODUCT TIME menu is used to change the Hold and Cook-More times.

B. Press and hold the PRINCE CASTLE LOGO button, then immediately press and hold the MENU/ENTER button until the display shows

one of the programming menus.

C. Use the UP or DOWN Arrow button to scroll to the PROD TIME 

 ENTR menu. (NOTE: Units with 6 or 8 pan displays will show SET

PRODUCT TIME 

 ENTR.)

PRINCE CASTLE LOGO Button MENU/ENTER Button