Lelit Mara PL62G [18/158] Changing the settings

PRO Line - Mara - PL62S · PL62 · PL62T

Point the steam wand at the cup rack and release some steam at least once.

Clean the wand (4) carefully with a sponge or a clean cloth. e chapter on “Cleaning and

maintenance” provides all the necessary instructions.

Hot water distribution

I.1 Place a jug under the hot water nozzle (12) and open the hot water knob (11) by

turning it anti-clockwise until you have the quantity of hot water required.

I.2 Close the hot water knob (11).

for experts

Changing the settings (only for PL62T)

The PID is set by the factory to 121°C. Instructions for adjusting the setting are

given below.

Adjusting the boiler temperature

J.1 Press the “down” button.

J.2 When the display shows “PRG” press the “up” button.

J.3 When the display shows the boiler temperature, set the temperature us-

ing the “up” and “down” buttons till you reach the required temperature: min

110°C – max 126°C.

J.4 Use the “up” and “down” buttons to adjust the temperature as desidered.

J.5 About 3 seconds after the last button has been pressed, the setting will be

saved and the display will indicate the temperature.

Note. Converting the temperature: press “down” and “up” buttons at the same time for

about 3 seconds. When the display shows “C-F”, release both buttons and aerwards press the

button “up” to convert the temperature from Celsius degrees to Fahrenheit degrees. About 3 sec-

onds aer the last button has been pressed, the setting will be saved.