Hytera TC-518 Инструкция по эксплуатации онлайн [18/25] 31361

17
Press the function key to enter the Squelch Off mode, and press it again to exit.
Squelch Off Momentary
Causes the radio to forcibly unmute speaker to hear activities on the current channel,
whatever the receive condition is. The radio speaker outputs audio when audio signal is
present, or background noise will be heard if no audio signal is detected.
Holds down the function key to enter the Squelch Off Momentary mode, and release it to
exit.
Monitor
Carrier condition must be satisfied for the radio to unmute to an incoming call, regardless
of CTCSS/CDCSS condition.
Press the function key to enter Monitor mode, and press it again to exit.
Monitor Momentary
Carrier condition must be satisfied for the radio to unmute to an incoming call, regardless
of CTCSS/CDCSS condition.
Holds down the function key to enter Monitor Momentary mode, and release it to exit.
Scan
Press the programmed Scan key to initiate scanning ascending through the channel
numbers in scan list. Green LED flashes during the scan process, and solidly glows when
activity is detected on a channel and signaling condition is satisfied. Press the key again
to exit scanning.
When scanning is active, the radio continuously scans for activity on scan list members.
Once activity is detected on a channel, scanning pauses on the active channel for you to
receive activity. Your dealer can choose channels that you wish to scan and list them in a
scan list.
No Priority Channel
Assuming a scan list with 6 channels, if all the channels are non-prioritized, the normal
scan operation would proceed in the following sequence, as shown in figure 1.

Содержание