Hytera TC-518 [20/25] Busy channel lockout bcl

The radio automatically exits from scan mode when it is switched to another channel.

c. Turn the radio off.

 Talk Back

Defines whether the user is able to PTT the radio and talk back on the channel on which

the radio currently stops.

When checked, if the radio stops on a channel, the radio user is able to PTT the radio and

talk back on that channel. If the radio does not stop on any channel, the user is able to

PTT the radio and talk back on the predefined channel.

When unchecked, the radio shall always use the predefined channel to transmit.

 Priority Channel Scan

Enable you to constantly monitor & keep an update on the activities on the most

commonly used channel so that messages will not be missed. Check with your dealer for

details.

When scanning remains on a non-priority channel, the radio continues to monitor activities

on the priority channel, and jumps to the priority channel if activity is detected.

 Available Keys in Scan Mode

Valid keys in Scan mode include PTT key, volume adjustment keys + / -, and 4

programmable keys of Squelch Off, Squelch Off Momentary, Monitor and Monitor

Momentary.

Note: never add a blank channel to a Scan List or designate it as the Tx Channel.

Busy Channel Lockout (BCL)

Avoid interference with the users using the same channel by preventing transmission if

another talk group is already on the air. The radio will generate a continuous tone upon

PTT press if a transmission is not allowed. Release the PTT to cancel the tone.

Low Battery Alert

For extra convenience, LED flashes red and a low-pitched tone sounds every ten seconds

should the battery level run low, to alert users to recharge the battery.