Home
Главная
Gorenje
Электромясорубка
MG1800TJW
Инструкция по эксплуатации Страница: 13

Gorenje MG1800TJW [13/32] Making tomato

Safety system

This appliance is equipped with a non-

resettable, current-sensitive glass fuse that cuts

off the power supply in case of motor failure to

prevent overheating of the appliance.

This system will automatically cut off the power

supply to the appliance in case of overheating.

If your appliance suddenly stops running:

1. Pull the mains plug out of the socket.

2. Let the appliance cool down for 60

minutes

3. Put the mains plug in the socket.

4. Press the switch button to turn off the

appliance.

5. Press the circuit breaker button at the

bottom of the appliance to turn on the

appliance.

Please contact you dealer of an authorized

service center if the thermostat system is

activated too often.

Mincing meat - tips and warnings

 Make sure the cutting edges of the cutter unit

are pointing outwards.

 Make sure the notch of the grinding disc

fits onto the projection of the cutter housing.

 Never use frozen meat!

 Do not overload the appliance during use by

pushing too much meat into the cutter

housing.

 Cut the meat into 10cm-long, 2cm-thick strips.

 Remove bones, gristles and sinews as much

as possible.

 Put the prepared meat on the feeding tray.

 Press the on/off button to switch the appliance

on.

 Use the pusher to gently push the meat into

the cutter housing.

 For steak tartare, mince the meat with the

medium grinding disc twice.

Making sausages - tips and

warnings

Always mince the meat first.

 Let the sausage skin soak in lukewarm water

for 10 minutes. Then slide the wet skin onto

the sausage horn. Do not block the air

outlet grooves of the horn.

 Put the minced meat of the feeding tray.

Press ON/ OFF button to switch the appliance

on.

 If the skin gets stuck on the sausage horn,

wet it with some later.

Making Tomato

1. Insert the worm shaft into the cutter housing,

the plastic end first. Place the cone in the cutter

housing. Place the former on the cutter housing

and screw the ring on the cutter housing.

2. Attach the cutter housing to the motor unit.

3. Place the tray on the upright part of the cutter

housing.

4. Now the appliance is ready for making tomato

mush.

Gorenje MG1800TJW [13/32] Making tomato

Содержание

Похожие устройства