![Makita BSS610RFE [8/36] Functional description](/img/pdf.png)
Makita BSS610RFE [8/36] Functional description
8
that Retracting handle does not touch tool housing.
Leaving blade exposed is VERY DANGEROUS and
can lead to serious personal injury.
11. Check the operation of the lower guard spring. If
the guard and the spring are not operating
properly, they must be serviced before use. Lower
guard may operate sluggishly due to damaged parts,
gummy deposits, or a build-up of debris.
12. Lower guard should be retracted manually only for
special cuts such as “plunge cuts” and
“compound cuts.” Raise lower guard by retracting
handle and as soon as blade enters the material,
the lower guard must be released. For all other
sawing, the lower guard should operate automatically.
To avoid kickback, do support board or panel near the
cut. Do not support board or panel away from the cut.
13. Always observe that the lower guard is covering
the blade before placing saw down on bench or
floor. An unprotected, coasting blade will cause the
saw to walk backwards, cutting whatever is in its path.
Be aware of the time it takes for the blade to stop after
switch is released. Before setting the tool down after
completing a cut, be sure that the lower guard has
closed and the blade has come to a complete stop.
14. Use extra caution when cutting damp wood,
pressure treated lumber, or wood containing
knots. Adjust speed of cut to maintain smooth
advancement of tool without decrease in blade speed.
15. Avoid Cutting Nails. Inspect for and remove all
nails from lumber before cutting.
16. Place the wider portion of the saw base on that
part of the workpiece which is solidly supported,
not on the section that will fall off when the cut is
made. As examples, Fig. 5 illustrates the RIGHT
way to cut off the end of a board, and Fig. 6 the
WRONG way. If the workpiece is short or small,
clamp it down. DO NOT TRY TO HOLD SHORT
PIECES BY HAND!
17. Never attempt to saw with the circular saw held
upside down in a vise. This is extremely
dangerous and can lead to serious accidents.
(Fig. 7)
18. Some material contains chemicals which may be
toxic. Take caution to prevent dust inhalation and
skin contact. Follow material supplier safety data.
19. Do not stop the blades by lateral pressure on the
saw blade.
20. Always use blades recommended in this manual.
Do not use any abrasive wheels.
21. Wear a dust mask and hearing protection when
use the tool.
SAVE THESE INSTRUCTIONS
WARNING:
MISUSE or failure to follow the safety rules stated in
this instruction manual may cause serious personal
injury.
IMPORTANT SAFETY
INSTRUCTIONS FOR BATTERY
CARTRIDGE
1. Before using battery cartridge, read all
instructions and cautionary markings on (1)
battery charger, (2) battery, and (3) product using
battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an
explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conductive
material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
7. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the battery
cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
3. Charge the battery cartridge with room
temperature at 10°C – 40°C (50°F – 104°F). Let a
hot battery cartridge cool down before charging it.
FUNCTIONAL DESCRIPTION
CAUTION:
• Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
(Fig. 8)
• Always switch off the tool before insertion or removal of
the battery cartridge.
• To remove the battery cartridge, withdraw it from the
tool while sliding the button on the side of the cartridge.
Содержание
- Akku kreissäge 1
- Akumulatorowa pilarka tarczowa 1
- Bss610 1
- Cordless circular saw 1
- Беспроводная циркулярная пила 1
- English 5
- Explanation of general view 5
- General safety rules 5
- Save these instructions 5
- Specifications 5
- Specific safety rules 6
- Functional description 8
- Important safety instructions for battery cartridge 8
- Installing or removing battery cartridge fig 8 8
- Save these instructions 8
- Tips for maintaining maximum battery life 8
- Adjusting depth of cut fig 9 9
- Assembly 9
- Bevel cutting fig 10 11 9
- Connecting a vacuum cleaner fig 17 18 9
- Hex wrench storage fig 16 9
- Lighting the lamp 9
- Operation fig 19 9
- Removing or installing saw blade 9
- Sighting fig 12 9
- Switch action fig 13 9
- Accessories 10
- Adjusting for accuracy of 90 and 45 cut vertical and 45 cut fig 21 22 10
- Maintenance 10
- Replacing carbon brushes 10
- Rip fence guide rule fig 20 10
- Allgemeine sicherheitsregeln 11
- Bewahren sie diese anweisungen auf 11
- Deutsch 11
- Erklärung der gesamtdarstellung 11
- Technische angaben 11
- Besondere sicherheitshinweise 13
- Bewahren sie diese anweisungen auf 15
- Einstellung der schnittiefe abb 9 15
- Funktionsbeschreibung 15
- Gehrungsschnitt abb 10 und 11 15
- Montage und demontage des akkublocks abb 8 15
- Tipps für den erhalt der maximalen akku nutzungsdauer 15
- Wichtige sicherheitsanweisungen für akkublock 15
- Anschluss eines staubsaugers abb 17 und 18 16
- Aufbewahrung des inbusschlüssels abb 16 16
- Bedienung des schalters abb 13 16
- Betrieb abb 19 16
- Einschalten der lampe 16
- Montage 16
- Montage und demontage des sägeblatts 16
- Schnittlinie abb 12 16
- Austausch der kohlebürsten 17
- Einstellung der 90 und 45 schnittgenauigkeit vertikal und 45 schnitt abb 21 und 22 17
- Parallelanschlag führungslineal abb 20 17
- Wartung 17
- Zubehör 17
- Dane techniczne 18
- Instrukcj obsługi nale y zachować 18
- Obja nienia do widoku ogólnego 18
- Ogólne zasady bezpiecze stwa 18
- Polski 18
- Szczegółowe zasady bezpiecze stwa 20
- Instrukcj obsługi nale y zachować 22
- Opis działania 22
- Wa ne zasady bezpiecze stwa dotycz ce akumulatora 22
- Wkładanie lub wyci ganie akumulatora rys 8 22
- Wskazówki dotycz ce zachowania maksymalnej trwało ci akumulatora 22
- Ci cie pod k tem w pionie rys 10 i 11 23
- Demonta lub monta tarczy 23
- Mechanizm przeł cznika rys 13 23
- Obsługa rys 19 23
- Podł czanie odkurzacza rys 17 i 18 23
- Prowadzenie narz dzia wzdłu zadanej linii rys 12 23
- Regulacja gł boko ci ci cia rys 9 23
- Schowek na klucz sze ciok tny rys 16 23
- Wł czanie lampki 23
- Konserwacja 24
- Prowadnica wzdłu na rys 20 24
- Regulacja dokładno ci ci cia 90 i 45 w pionie i pod k tem 45 rys 21 i 22 24
- Wymiana szczotek w glowych 24
- Wyposa enie dodatkowe 24
- Общие правила техники безопасности 26
- Пояснения к общему виду 26
- Русский 26
- Сохраните данные инструкции 26
- Технические характеристики 26
- Специфические правила техники безопасности 28
- Важные инструкции по технике безопасности относительно аккумуляторного блока 30
- Сохраните данные инструкции 30
- Включение рис 13 31
- Выпиливание четверти рис 12 31
- Описание функций 31
- Распиливание под углом рис 10 и 11 31
- Регулирование глубины пиления рис 9 31
- Советы по обеспечению максимального срока службы аккумуляторного блока 31
- Сохраните данные инструкции 31
- Установка или снятие аккумуляторного блока рис 8 31
- Включение лампы освещения 32
- Место хранения шестигранного ключа рис 16 32
- Подключение к пылесосу рис 17 и 18 32
- Сборка 32
- Снятие или установка циркулярной пилы 32
- Эксплуатация рис 19 32
- Замена угольных щеток 33
- Направляющая планка направляющая линейка рис 20 33
- Обслуживание 33
- Принадлежности 33
- Регулирование для точного пиления под углом 90 и 45 вертикальное пиление и пиление под углом 45 рис 21 и 22 33
Похожие устройства
- Makita 2107FW Инструкция по эксплуатации
- Makita 6940DW Инструкция по эксплуатации
- Makita 6270DWPLE Инструкция по эксплуатации
- Makita 9924DB Инструкция по эксплуатации
- Makita 6280DWPLE Инструкция по эксплуатации
- Makita 6339DWAE Инструкция по эксплуатации
- Makita 6951 Инструкция по эксплуатации
- Makita BHP343RFE Инструкция по эксплуатации
- Makita BDF343RFE Инструкция по эксплуатации
- Makita BPB180RFE Инструкция по эксплуатации
- Makita BJV140Z Инструкция по эксплуатации
- Makita BDA351Z Инструкция по эксплуатации
- Makita BJV180RFE Инструкция по эксплуатации
- Makita BDA351RFE Инструкция по эксплуатации
- Makita BHP444RFE Инструкция по эксплуатации
- Makita BJV140RFE Инструкция по эксплуатации
- Makita BJV180Z Инструкция по эксплуатации
- Makita BDA350Z Инструкция по эксплуатации
- Makita BTW250Z Инструкция по эксплуатации
- Makita BMR050 Инструкция по эксплуатации