Kenwood KDC-X5200BT [22/128] Audio settings

Kenwood KDC-X5200BT [22/128] Audio settings
18
ENGLISH
Data Size: B6L (182 mm x 128 mm)
Book Size: B6L (182 mm x 128 mm)
BASS BOOST
LEVEL1
/
LEVEL2
/
LEVEL3
/
LEVEL4
/
LEVEL5
:Selects your preferred bass boost
level.;
OFF
:Cancels.
LOUDNESS
LEVEL1
/
LEVEL2
:Selects your preferred low and high frequencies boost to
produce a well-balanced sound at a low volume level.;
OFF
:Cancels.
SUBWOOFER SET ON
:Turns on the subwoofer output.;
OFF
:Cancels.
FADER
(Not applicable if 3-way crossover is selected.)
REAR 15
to
FRONT15
(
0
):Adjusts the rear and front speaker output balance.
BALANCE LEFT 15
to
RIGHT15
(
0
):Adjusts the left and right speaker output balance.
VOLUME OFFSET
LEVEL –15
to
LEVEL +6
(
LEVEL 0
):Preset the initial volume level of each
source. (Before adjustment, select the source you want to adjust.)
SOUND EFFECT
SOUND
RECONSTRA
(Sound
reconstruction)
(Not applicable for RADIO source and AUX source.)
ON
:Creates realistic sound by compensating the high-frequency components
and restoring the rise-time of the waveform that are lost in audio data
compression.;
OFF
:Cancels.
SPACE
ENHANCER
(Not applicable for RADIO source.)
SMALL
/
MEDIUM
/
LARGE
:Virtually enhances the sound space.;
OFF
:Cancels.
SOUND REALIZER LEVEL1
/
LEVEL2
/
LEVEL3
:Virtually makes the sound more realistic.;
OFF
:Cancels.
STAGE EQ LOW
/
MIDDLE
/
HIGH
:Virtually adjust the sound position heard from the
speakers.;
OFF
:Cancels.
DRIVE EQ ON
: Boosts the frequency to reduce the noise heard from outside the car or
running noise of the tyres.;
OFF
:Cancels.
SPEAKER SIZE
Depending on the crossover type you have selected
( 5)
, 2-way crossover
or 3-way crossover setting items will be shown.
( 19)
By default, 2-way crossover type is selected.
X’OVER
DTA SETTINGS
For settings,
20, Digital Time Alignment settings
.
CAR SETTINGS
[SUB-W LEVEL]
is selectable only if
[SUBWOOFER SET]
is set to
[ON]
.
AUDIO SETTINGS
Crossover settings
Below are the available setting items for 2-way crossover and
3-way crossover.
SPEAKER SIZE
Selects according to the connected speaker size for optimum
performance.
The frequency and slope settings are automatically set for the
crossover of the selected speaker.
When 2-way crossover is selected, if
[NONE]
is selected for
[TWEETER]
of
[FRONT]
,
[REAR]
and
[SUBWOOFER]
for
[SPEAKER SIZE]
, the
[X ‘ OVER]
setting of the speaker is not available.
When 3-way crossover is selected, if
[NONE]
is selected for
[WOOFER]
of
[SPEAKER SIZE]
, the
[X’OVER]
setting of
[WOOFER]
is not
available.
X ‘ OVER
• [FRQ]
/
[FRONT-HPF FRQ]
/
[REAR-HPF FRQ]
/
[SW LPF FRQ]
/
[HPF FRQ]
/
[LPF FRQ]
: Adjusts the crossover frequency for the selected
speakers (high pass filter or low pass filter).
If
[THROUGH]
is selected, all signals are sent to the selected
speakers.
[FRONT-HPF SLOPE]
/
[REAR-HPF SLOPE]
/
[SW LPF SLOPE]
/
[HPF SLOPE]
/
[LPF SLOPE]
/
[SLOPE]:
Adjusts the crossover slope.
Selectable only if a setting other than
[THROUGH]
is selected for
the crossover frequency.
[SW LPF PHASE]
/
[PHASE]:
Selects the phase of the speaker output to
be in line with the other speaker output.
• [GAIN LEFT]
/
[GAIN RIGHT]
/
[FRONT-HPF GAIN]
/
[REAR-HPF GAIN]
/
[SW LPF GAIN]
/
[GAIN]
:
Adjusts the output volume of the selected
speaker.
JS_KWD_KDC_X5200BT_EN_EN_3.indd 18JS_KWD_KDC_X5200BT_EN_EN_3.indd 18 8/21/2017 2:11:48 PM8/21/2017 2:11:48 PM

Содержание

Похожие устройства

Скачать
Случайные обсуждения