Hotpoint-Ariston CG 64 SG3 R/HA [19/68] H hotpoint

Hotpoint-Ariston CG 64 SG3 R/HA [19/68] H hotpoint
GB
19
5. Turn the knob from the MAX position to the MIN
position quickly or open and shut the oven door,
making sure that the burner is not extinguished.
Adapting the grill
Replacing the grill burner nozzle:
1. Remove the oven burner
after loosening screw V (see
figure).
2. Unscrew the grill burner nozzle
using a special nozzle socket
spanner (see figure) or preferably
with a 7 mm socket spanner, and
replace it with a new nozzle that
is suited to the new type of gas
(see Burner and nozzle
specifications table).
! Be careful of the spark plug wires and the
thermocouple tubes.
! The oven and grill burners do not require primary air
adjustment.
! After adjusting the appliance so it may be used with
a different type of gas, replace the old rating label
with a new one that corresponds to the new type of
gas (these labels are available from Authorised
Technical Assistance Centres).
! Should the gas pressure used be different (or vary
slightly) from the recommended pressure, a suitable
pressure regulator must be fitted to the inlet hose in
accordance with current national regulations relating
to regulators for channelled gas.
TECHNICAL DATA
Oven Dimensions
HxWxD
31x43,5x43,5 cm
Volume
58 l
Useful
measu rements
relating to the
oven compartment
width 46 cm
de
p
th 42 cm
hei
g
ht 8,5 cm
Voltage and
frequency
see data
p
late
Burners
ma
y
be ada
p
ted for use with an
y
t
yp
e of
g
as shown on the data
p
late.
EC Directives 73/23/EEC dated
19/02/73 (Low Volta
g
e) and
subse
q
uent amendments -
89/336/EEC dated 03/05/89
(Electroma
g
netic Com
p
atibilit
y
)
and subse
q
uent amendments -
90/369/EEC dated 29/06/90 (Gas)
and subse
q
uent amendments -
90/68/EEC dated 22/07/93 and
subse
q
uent amendments. -
2002/96/EEC.
V
I

Содержание

H Hotpoint ARISTON TECHNICAL DATA GB Oven Dimensions HxWxD 31x43 5x43 5 cm Volume 58 I Useful measurements relating to the oven compartment width 46 cm depth 42 cm height 8 5 cm 5 Turn the knob from the MAX position to the MIN position quickly or open and shut the oven door making sure that the burner is not extinguished Voltage and frequency see data plate Adapting the grill Burners may be adapted for use with any type of gas shown on the data plate Replacing the grill burner nozzle 1 Remove the oven burner after loosening screw V see figuré EC Directives 73 23 EEC dated 19 02 73 Low Voltage and subsequent amendments 89 336 EEC dated 03 05 89 Electromagnetic Compatibility and subsequent amendments 90 369 EEC dated 29 06 90 Gas and subsequent amendments 90 68 EEC dated 22 07 93 and subsequent amendments 2002 96 EEC 2 Unscrew the grill burner nozzle using a special nozzle socket spanner see figure or preferably with a 7 mm socket spanner and replace it with a new nozzle that is suited to the new type of gas see Burner and nozzle specifications table Be careful of the spark plug wires and the thermocouple tubes The oven and grill burners do not require primary air adjustment After adjusting the appliance so it may be used with a different type of gas replace the old rating label with a new one that corresponds to the new type of gas these labels are available from Authorised Technical Assistance Centres Should the gas pressure used be different or vary slightly from the recommended pressure a suitable pressure regulator must be fitted to the inlet hose in accordance with current national regulations relating to regulators for channelled gas 19

Скачать