Husqvarna LC140S (9676368-01) [77/420] Operating

Husqvarna LC140S (9676368-01) [77/420] Operating
OPERATING
English 77
Starting and stopping
Before starting
Keep people and animals well away from the working
area.
Perform daily maintenance. See instructions in the
section "Maintenance".
Ensure the ignition lead sits correctly on the spark
plug.
Starting
1 If the lawn mower is being started for the first time
press on the fuel pump five times. After that you
should press on the fuel pump three times when
starting a cold engine.
2 The engine brake handle must be held against the
handlebar when the engine is started.
3 Position yourself behind the machine.
4 Grip the starter handle, slowly pull out the cord with
your right hand until you feel some resistance (the
starter pawls grip). Pull with force to start the engine.
Never twist the starter cord around your hand.
Drive (LC 140S)
Push the propulsion bar in towards the handle in order
to start the drive.
Before pulling the machine towards you, disengage
the drive and push the machine forward approx. 10
cm.
Adjusting the clutch wire
When the drive starts feeling slow you need to adjust the
clutch wire.
Finely adjust the wire using the adjuster screw.
To tension the wire and increase speed, screw the
adjustment screw counterclockwise.
Make sure the wires are not tensioned too tight. If the
lawn mower starts to drive withtout the clutch lever is
beeing operated, extend the wire.
To extend the wire and reduce speed, screw the
adjustment screw clockwise.
Stopping
Stop the engine by releasing the engine brake handle.
The drive is also disengaged when you release the
engine brake handle.
!
WARNING! Please read the operator’s
manual carefully and make sure you
understand the instructions before using
the machine.
Wear personal protective equipment. See
instructions under the ”Personal
protective equipment” heading.

Содержание

Похожие устройства

OPERATING Starting and stopping Drive LC 140S Before starting Push the propulsion bar in tcwards the handle in order to start the drive WARNING Please read the operator s manual carefully and make sure you understand the instructions before using the machine Wear personal protective equipment See instructions under the Personal protective equipment heading Keep people and animals well away from the working area Perform daily maintenance See instructions in the section Maintenance Before pulling the machine towards you disengage the drive and push the machine forward approx 10 cm Ensure the ignition lead sits correctly on the spark plug Adjusting the clutch wire Starting 1 If the lawn mower is being started for the first time press on the fuel pump five times After that you should press on the fuel pump three times when starting a cold engine When the drive starts feeling slow you need to adjust the clutch wire Finely adjust the wire using the adjuster screw To tension the wire and increase speed screw the adjustment screw counterclockwise 2 The engine brake handle must be held against the handlebar when the engine is started Make sure the wires are not tensioned too tight If the lawn mower starts to drive withtout the clutch lever is beeing operated extend the wire To extend the wire and reduce speed screw the adjustment screw clockwise Stopping Stop the engine by releasing the engine brake handle The drive is also disengaged when you release the engine brake handle 3 Position yourself behind the machine 4 Grip the starter handle slowly pull out the cord with your right hand until you feel some resistance the starter pawls grip Pull with force to start the engine Never twist the starter cord around your hand English 77

Скачать