Husqvarna LC140S (9676368-01) [78/420] Cutting equipment
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Husqvarna LC140S (9676368-01) [78/420] Cutting equipment

Husqvarna 353 (9651697-15) [78/420] Cutting equipment
MAINTENANCE
78 – English
General
• Let your Husqvarna dealer regularly check the
machine and make essential adjustments and repairs.
• Replace any damaged, worn or broken parts.
• Always use genuine accessories.
Maintenance schedule
In the maintenance schedule you can see which parts of
your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated
based on daily use of the machine, and may differ
depending on the rate of usage.
*See instructions in the section "Machine’s safety
equipment".
General inspection
• Check that nuts and screws are tight.
External cleaning
• Brush leaves, grass and the like off of the lawn mower.
• Do not use a high pressure washer to clean the
machine.
• Never flush water directly on the engine.
• Clean the air intake on the starter. Check the starter
and starter cord.
• When cleaning under the cutting cover, empty the fuel
tank and put the machine with the spark plug
upwards.
Oil level
The lawn mower should stand on flat ground when you
check the oil level. Check the oil level with the dipstick on
the oil filler cap.
• Remove the oil cap and wipe the dipstick clean.
• Put the dipstick back in. The oil filler cap must be
completely screwed down to give a correct picture of
the oil level.
• If the oil level is low, fill using engine oil up to the upper
level on the dipstick.
Oil change
• Empty the fuel tank.
• Unscrew the oil filler cap.
• Place a suitable vessel to collect the oil in.
• Drain the oil by tipping the engine so that the oil runs
out through the filler pipe. Ask where you can dispose
of surplus engine oil at your local petrol station.
• Fill with new engine oil of a good quality. See
instructions in the section "Technical data".
Cutting equipment
• Check the cutting attachment for damage or cracks. A
damaged cutting attachment should always be
replaced.
• Always ensure the cutter is well ground and balanced
correctly.
!
WARNING! The user must only carry out
the maintenance and service work
described in this Operator's Manual.
More extensive work must be carried out
by an authorized service workshop.
Switch off the engine before carrying out
any checks or maintenance. Prevent
unintentional starting by removing the
ignition cable from the spark plug.
The life span of the machine can be
reduced and the risk of accidents can
increase if machine maintenance is not
carried out correctly and if service and/or
repairs are not carried out professionally.
If you need further information please
contact your nearest service workshop.
Before
starting
Weekly
maintenan
ce
Monthly
maintenan
ce
General
inspection
Spark plug Air filter
External
cleaning
Muffler*
Fuel
system
Oil level
Cutting
equipment
Cutting cover*
Adjusting the
clutch wire
Engine brake
handle
!
WARNING! Always wear heavy-duty
gloves when servicing and maintaining
the cutting equipment. The cutters are
very sharp and cuts can occur very
easily.
CAUTION! The blades should be balanced after
sharpening.
Damaged blades should be replaced when hitting
obstacles that result in a breakdown.

Содержание

Похожие устройства

MAINTENANCE General External cleaning Ak WARNING The user must only carry out the maintenance and service work described in this Operator s Manual More extensive work must be carried out by an authorized service workshop Switch off the engine before carrying out any checks or maintenance Prevent unintentional starting by removing the Ignition cable from the spark plug The life span of the machine can be reduced and the risk of accidents can Increase If machine maintenance is not carried out correctly and If service and or repairs are not carried out professionally If you need further information please contact your nearest service workshop Let your Husqvarna dealer regularly check the machine and make essential adjustments and repairs Replace any damaged worn or broken parts Always use genuine accessories Maintenance schedule In the maintenance schedule you can see which parts of your machine that require maintenance and with which intervals it should take pl ace The intervals are calculated based on daily use of the machine and may differ depending on the rate of usage Brush leaves grass and the like off of the lawn mower Do not use a high pressure washer to clean the machine Never flush water directly on the engine Clean the air intake on the starter Check the starter and starter cord When cleaning under the cutting cover empty the fuel tank and put the machine with the spark plug upwards Oil level The lawn mower should stand on flat ground when you check the oil level Check the oil level with the dipstick on the oil filler cap Remove the oil cap and wipe the dipstick clean Put the dipstick back in The oil filler cap must be completely screwed down to give a correct picture of the oil level If the oil level is low fill using engine oil up to the upper level on the dipstick Oil change Empty the fuel tank Unscrew the oil filler cap Place a suitable vessel to collect the oil in Drain the oil by tipping the engine so that the oil runs out through the filler pipe Ask where you can dispose of surplus engine oil at your local petrol station Before starting Weekly maintenan ce Monthly maintenan ce General inspection Spark plug Air filter Cutting equipment External cleaning Muffler Fuel system Check the cutting attachment for damage or cracks A damaged cutting attachment should always be replaced Oil level Cutting equipment Cutting cover Adjusting the clutch wire Engine brake handle See instructions in the section Machine s safety equipment General inspection Check that nuts and screws are tight 78 English Fill with new engine oil of a good quality See instructions in the section Technical data Always ensure the cutter is well ground and balanced correctly WARNING Always wear heavy duty gloves when servicing and maintaining the cutting equipment The cutters are very sharp and cuts can occur very easily CAUTION The blades should be balanced after sharpening Damaged blades should be replaced when hitting obstacles that result in a breakdown

Скачать