Indesit IWSC 51052A — уход и обслуживание стиральной машины: советы и рекомендации [28/36]

Превью страниц Страница 28 / 36
Indesit IWSC 51052A [28/36] Cutting off the water and electricity supplies
28
GB
Care and maintenance
Cutting off the water and electricity
supplies
•Turnoffthewatertapaftereverywashcycle.
This will limit wear on the hydraulic system in-
side the washing machine and help to prevent
leaks.
•Unplugthewashingmachinewhencleaningit
and during all maintenance work.
Cleaning the washing machine
The outer parts and rubber components of the
appliance can be cleaned using a soft cloth
soaked in lukewarm soapy water. Do not use
solvents or abrasives.
Cleaning the detergent dispenser
drawer
Remove the dispenser
by raising it and pulling
it out (see figure).
Wash it under running
water; this operation
should be repeated
frequently.
Caring for the door and drum of
your appliance
•Alwaysleavetheportholedoorajarinorderto
prevent unpleasant odours from forming.
Cleaning the pump
The washing machine is fitted with a self-clea-
ning pump which does not require any mainte-
nance. Sometimes, small items (such as coins
or buttons) may fall into the pre-chamber which
protects the pump, situated in its bottom part.
! Make sure the wash cycle has finished and
unplug the appliance.
To access the pre-chamber:
1. using a screwdriver,
remove the cover pa-
nel on the lower front
part of the washing
machine (see figure);
2. unscrew the lid by
rotating it anti-clockwi-
se (see figure): a little
water may trickle out.
This is perfectly nor-
mal;
3. clean the inside thoroughly;
4. screw the lid back on;
5. reposition the panel, making sure the hooks
are securely in place before you push it onto the
appliance.
Checking the water inlet hose
Check the inlet hose at least once a year. If there
are any cracks, it should be replaced immedia-
tely: during the wash cycles, water pressure is
very strong and a cracked hose could easily
split open.
! Never use second-hand hoses.

Содержание

326

Care and maintenance GB Cutting off the water and electricity supplies Turn off the water tap after every wash cycle This will limit wear on the hydraulic system in side the washing machine and help to prevent leaks To access the pre chamber 1 using a screwdriver remove the cover pa nel on the lower front part of the washing machine see figure Unplug the washing machine when cleaning it and during all maintenance work Cleaning the washing machine The outer parts and rubber components of the appliance can be cleaned using a soft cloth soaked in lukewarm soapy water Do not use solvents or abrasives 2 unscrew the lid by rotating it anti clockwi se see figure a little water may trickle out This is perfectly nor mal Cleaning the detergent dispenser drawer Remove the dispenser by raising it and pulling it out see figure Wash it under running water this operation should be repeated frequently 3 clean the inside thoroughly 4 screw the lid back on 5 reposition the panel making sure the hooks are securely in place before you push it onto the appliance Checking the water inlet hose Caring for the door and drum of your appliance Always leave the porthole door ajar in order to prevent unpleasant odours from forming Check the inlet hose at least once a year If there are any cracks it should be replaced immedia tely during the wash cycles water pressure is very strong and a cracked hose could easily split open Never use second hand hoses Cleaning the pump The washing machine is fitted with a self clea ning pump which does not require any mainte nance Sometimes small items such as coins or buttons may fall into the pre chamber which protects the pump situated in its bottom part Make sure the wash cycle has finished and unplug the appliance 28

Узнайте, как правильно ухаживать за стиральной машиной, чтобы продлить ее срок службы. Советы по чистке, проверке шлангов и предотвращению запахов.