Indesit IWSC 51052A — понимание индикаторов и функций стиральной машины [31/36]

p inoesiT Indicator lights Wash cycle phase indicator lights The indicator lights provide important information This is what they can tell you Once the desired wash cycle has been selected and has be gun the indicator lights switch on one by one to indicate which phase of the cyde is currently in progress Wash Delayed start If the DELAY TIMER function has been activated see Per sonalisation after the wash cycle has been started the indicator light corresponding to the selected delay period will begin to flash 3h o 6h o 9h o 12hjoz As time passes the remaining delay will be displayed and the corresponding indicator light will flash 6h o 9h o 12h o The set programme will start once the selected time delay has expired o Rinse Spin Drain OT End of wash cycle O END Function buttons and corresponding indicator lights When a function is selected the corresponding indicator light will illuminate If the selected function is not compatible with the program med wash cycle the corresponding indicator light will flash and the function will not be activated If the selected function is not compatible with another function which has been selected previously the indicator light corresponding to the first function selected will flash and only the second function will be activated the indicator light corresponding to the enabled option will remain lit S Door locked indicator light When the indicator light is on the porthole door is locked to prevent it from being opened make sure the indicator light is off before opening the door wait approximately 3 minutes To open the door during a running wash cycle press the START PAUSE button the door may be opened once the DOOR LOCKED indicator light turns off Starting a wash cycle 1 Switch the washing machine on by pressing the ON OFF button All indicator lights will switch on for a few seconds then they will switch off and the START PAUSE indicator light will pulse 2 Load the laundry and close the door 3 Set the WASH CYCLE knob to the desired programme 4 Set the washing temperature see Personalisation 5 Set the spin speed see Personalisation 6 Measure out the detergent and washing additives see Detergents and laundry 7 Select the desired functions 8 Start the wash cycle by pressing the START PAUSE button and the corresponding indicator light will remain lit in a fixed manner in green To cancel the set wash cycle pause the machine by pressing the START PAUSE button and select a new cycle 9 At the end of the wash cycle the END indicator light will switch on The door can be opened once the DOOR LOCKED indicator light turns off wait approximately 3 minutes Take out your laundry and leave the appliance door ajar to make sure the drum dries completely Switch the washing machine off by pressing the ON OFF button 31 GB