Beko ET 5614 HX [42/71] Part 4

Содержание

Part 4 Operating the top burners 4 1 Operating the gas burners To obtain maximum efficiency Use of top gas burners A correct use to burner results in gas saving and better out put Therefore we recommend to use saucepans whose base completely cover the flames Four saucepans with much smaller diameters to be put auxiliary burner use the pan support adaptor Turn the relevant knob by slightly pressing in counter clockwise direction The large flame on the knob corresponds to maximum capacity position and the small flame corresponds to minimum capacity position If your cooker has flame failure device on gas burners It provides automatic ignition When the button is pressed and released all plugs spark at the same time The ignition starts at the burner through which the gas flows If an ignition does not occur repeat the same action Holding the button at pressed position does not provide ignition Ignition by button In models with ignition Flame failure device In case of any flame failures with any reasons in the top burners the flame failure device immediately cuts of the gas flow It is also a safety device for the wrong use of the children You should turn the knob to the counter clockwise direction by pressing You should ignite by pressing the knob and wait for its ignition You should keep the knob at pressed position for 3 5 seconds after you see the flame around the burner Repeat the sequence of operations if the flame does not continues Ignition from the knob In models with ignition You should turn the knob to counter clockwise direction by pressing The spark occurs itself immediately on the burners till you take your hand off the knobs After you release the knob if the ignition does not continue repeat the same process by keeping the knob pressed for 15 seconds If still no igniton occurs wait for 1 minute and repeat again Warning Do not keep the knob in pressed position more than 15 seconds 22 u P 24 cm 7

Скачать
Случайные обсуждения