Beko ET 5614 HX [65/71] In models with lamp

Содержание

In models with lamp Replacing the oven door Replacing the oven lamp 1 Unplug the power cable 2 Then remove the protective glass cover of the lamp inside your oven by turning it counterclockwise 3 Then remove the bulb by turning it counterclockwise 4 After installing the correct bulb obtained from an Authorized Service reinstall the protective glass of the lamp 2 Open the latches placed on the hinges both sides of the front door until they touch the support pins 3 Close the front door till touching the latches For the square shaped lamp models There are 2 square shaped lamps at right and left side of the oven inside Both lamps are on and off at the same time Replacing the Oven Lamp Disconnect the appliance from the supply Take out screws on the side shelve Take out Lens of the oven lamp by means of the flat screwdriwer Replace defective lamp with the new one Reinstall lens and side sheelf Lamp type is 220 230V 15 25W E14 T300 C 4 Hold the oven door slightly at the handle close slightly pull upwards and close until there is a aperture of few centimeters are left Then you can detach 1 Open the front door to 90 the hinges from the housing The mount the door Do the above started instructions in reverse order Attention A sure that hinges are placed apropirately in the housing do not target to close the latches 30

Скачать
Случайные обсуждения