Beko CS 47100 [15/88] Operating the ceramic hobs

Содержание

4 3 Operating the Ceramic hobs The ceramic hobs are thermostatically controlled with a 6 level commutator One of the stage is the Off11 position The application field of the six remaining stages are given in table Fast radiant dual or extended type hot plates are energy regulating type They adjust the burner operation time of the heater continuously between 1st to 3rd stages Hob hot indicator lights Show which hob is operating and or hot Indicator lights will remain on whenever the hob is hot Whenever the temperature of the hob surface falls below 64 degrees C limit the indicator light will go off Corresponding cooking values Energy regulator stages 1 2 3 7 stages commutator 1 2 3 4 5 6 Application Do not touch and keep children away from the Simmering Cooking roasting boiling Dual or extended burners are energy regulating type adjusting the operation time of the heater continuous between 1st to 3rd stages Dual burner can heat up at 2 different positions Saving energy and time can be achieved by lighting the 1st stage for small pots and the 1st and 2nd stages for large pots By turning the burner knob clockwise the inner part of the burner will heat up You can use the 1st 2nd and 3rd stages according to the applications indicated in the table Keep turning the 11 11 knob in a clockwise direction starting from the 3rd stage until a click sound is heard to use the interior and exterior parts of the burner at the same time Both stages of the burner will operate After the completion of the cooking operation set the knob to 0 position by turning it in a counterclockwise direction Caution The 2nd stage of your dual or extended burners will not operate by itself heating zones and appliance at all times Position to hold hot