Beko CS 47100 [28/88] Oven interior

Содержание

Control panel Oven interior Before switching on again ensure that all controls are in the OFF position Take out all trays and the grill out of the oven Clean out the interior with a piece of moist soapy cloth Then clean it once more with a wet piece of cloth and let it to dry Do not use dry powder agents for cleaning Special cleaners that are commercially available may be used after carefully reading the warning that are written on the labels Wipe over the control panel with o damp cloth and polish with a dry cloth Do not use oven cleaners or aerosols scouring pads or abrasive powder for cleaning the plastic knobs as damage will occur Do not attempt to remove any of the control knobs from the panel as this may cause damage and is a safety hazard Oven door Wipe over the door outer panel with a cloth wrung out in hot soapy water then after wiping with a Warning Never clean the inside of the oven and trays with hard brushes steel pads or knives Special cleaners that are commercially avaible may be used after carefully reading the warning that are written on the labels cloth wrung out in clear water Do not use scouring pads or abrasive powder which may scratch the surface Take care during cleaning not to damage or distort the door seal Replacing the oven lamp in models with lamp Catalytic enamelled models The oven interior of this model is coated with catalytic enamel since the catalytic enamel cleans itsellf you do not have to perform an extra cleaning after the cooking operation 1 Unplug the power cable 2 Then remove theprotective glass cover of the lamp inside your oven by turning it counterclockwise 3 Then remove the bulb by If your oven obtains steel rack To clean the steel rack unscrew the 4 screws After cleaning operation assemble the steel rack to the oven body again turning it counterclockwise 4 After installing the correct bulb obtained from an Authorized Service reinstall the protective glass of the lamp