Beko CG 61110 G [40/52] In models with removal of the control panel

Содержание

Port 7t Gas convertion Your cooker can operate both Natural Gas and LPG You can convert by changing the gas source and the top burner oven and grill replacement injectors Call injectors procedure of are explained authorized Service The the below for gas In models with Removal of the control panel Redueed Tap Flow In models with removal of the control panel 1 Open the front door 2 Unscrew the two screws of the control panel and take the control panel bottom convertion Replacement of the top burner injector Take off the burner head and burner cap before starting this procedure Then 1 Remove the injector inside the top burner with a suitable bit Later install the new injector by covering the injector threads with leakage preventing sheet 3 Release the control panel from the two notches at the top slightly pull it to the bottom front and keep if free with its cables connected Ignite the burner that should be adjusted turn the knob to the reduced position pull and take the knob off 4 With a screwdriver make the tap reduced flow adjustment from the injector that is on the gas tap only the head is visible with the bolt shape should be 6 7mm Flame failure device material spark plug Injector It is sufficient to tight to screw completely in butane propane gas For the natural gas you should turn the If the flame is higher than the desired position turn the screw clockwise If its screw counter clockwise once The normal length of a straight smaller to the opposite For the last control of the burning of the cooker bring the cooker high flame and flame in the reduced position reduced positions and check whether the Burner flame is on or off 16