Tp-Link TL-R402M Инструкция по эксплуатации онлайн [21/61] 16540

TL-R402M Cable/DSL Router User Guide

Figure 4-4 WAN - Dynamic IP

This page displays the WAN IP parameters assigned dynamically by your ISP, including IP

address, Subnet Mask, Default Gateway, etc. Click the Renew button to renew the IP parameters

from your ISP. Click the Release button to release the IP parameters.

¾ MTU Size: The normal MTU (Maximum Transmission Unit) value for most Ethernet

networks is 1500 Bytes. For some ISPs you need to reduce the MTU. But this is rarely

required, and should not be done unless you are sure it is necessary for your ISP connection

¾ If your ISP gives you one or two DNS addresses, select Use These DNS Servers and enter

the primary and secondary addresses into the correct fields. Otherwise, the DNS servers will

be assigned dynamically from ISP

¾ Get IP with Unicast DHCP: A few ISPs' DHCP servers do not support the broadcast

applications. If you cannot get the IP address normally, you can choose this option. (You

generally need not check this option)

)

Note:

If you get Address not found errors when you go to a Web site, it is likely that your DNS servers

are set up improperly. You should contact your ISP to get DNS server addresses.

2. If you choose Static IP, you should have fixed IP parameters specified by your ISP. The

Static IP settings page will appear, shown in Figure 4-5: