Tp-Link TL-R860 [24/63] Mac clone

Tp-Link TL-R860 [24/63] Mac clone
TL-R860 Cable/DSL Router User Guide
specified by ISP” check box and enter the IP address , which your ISP provided.
¾ Detect Online Interval - The default value is 0, you can input the value between 0
and 120. The router will detect Access Concentrator online at every interval between
ary DNS server. If a
Click the Save button to save your settings.
You can configure the MAC address of the WAN port on this page,
Figure 4-10:
seconds. If the value is 0, it means do not detect.
¾ DNS IP Address - If you know that your ISP does not automatically transmit DNS
addresses to the router during login, click “Use the following DNS servers
checkbox and enter the IP address of your ISP’s prim
secondary DNS server address is available, enter it as well.
4.4.3 MAC Clone
Figure 4-10 MAC Address Clone
or Ethernet during installation. You do not
generally need to change anything here.
format for the
AC
Address button and this MAC address will fill in the WAN MAC Address field.
Factory MAC to restore the MAC address of WAN port to the factory
default value.
the button to save your settings.
ature.
2) If you click the Save button, the router will prompt you to reboot.
Some ISPs require that you register the MAC address of your adapter, which is
connected to your cable, DSL modem
¾ WAN MAC Address - This field displays the current MAC address of the WAN port,
which is used for the WAN port. If your ISP requires that you register the MAC
address, please enter the correct MAC address into this field. The
MAC address is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit).
¾ Your PC's MAC Address - This field displays the MAC address of the PC that is
managing the router. If the MAC address is required, you can click the Clone M
Click Restore
Click Save
)
Note:
1) Only the PC(s) on your LAN can use the MAC Address Clone fe
- 19 -

Содержание