Tp-Link TD-W8101G Инструкция по эксплуатации онлайн [53/63] 16739

TD-W8101G 54Mbps Wireless ADSL2+ Modem Router User Guide

4.5.3 SNMP

Choose “Access Management→SNMP”, you can see the SNMP screen. The Simple Network

Management Protocol (SNMP) is used for exchanging information between network devices.

Figure 4-38

¾ Get Community: Set the password for the incoming Get and Get next requests from the

management station.

¾ Set Community: Set the password for incoming Set requests from the management station.

4.5.4 UPnP

Choose “Access Management→UPnP”, you can configure the UPnP in the screen (shown in

Figure 4-39).

UPnP (Universal Plug and Play) is a distributed, open networking standard that uses TCP/IP for

simple peer-to-peer network connectivity between devices. An UPnP device can dynamically join

a network, obtain an IP address, convey its capabilities and learn about other devices on the

network. In turn, a device can leave a network smoothly and automatically when it is no longer in

use. UPnP broadcasts are only allowed on the LAN.

Figure 4-39

¾ UPnP: Activate or Deactivate the UPnP function. Only when the function is activated, can the

UPnP take effect.

¾ Auto-Configure: If you activate the function, then the UPnP network devices can

automatically configure network addressing, announce their presence in the network to other

UPnP devices and enable exchange of simple product and service descriptions.

4.5.5 DDNS

Choose “Access Management→DDNS”, you can configure the DDNS function in the screen

(shown in Figure 4-40).

The Router offers a Dynamic Domain Name System (DDNS) feature. The feature lets you use a