Tp-Link TL-R4299G Инструкция по эксплуатации онлайн [83/86] 39444

TL-R4299G Dual-WAN SMB Broadband Router User Guide

2. How do I configure the router to access Internet by Ethernet users?

Step 1: Login to the router, click the menu Network→WAN on the left of your browser, On the

WAN screen, select “Dynamic IP” for "WAN Connection Type", and finish it by clicking

Save.

Step 2: Some ISPs require that you register the MAC address of your adapter, which is

connected to your cable or DSL modem during installation. If your ISP requires MAC

Clone screen, if your PC’s MAC address is a proper MAC address, click the "Clone MAC

Address" button and your PC’s MAC address will be filled in the "WAN MAC Address"

field; Or else, enter the specific MAC address into the "WAN MAC Address" field

manually. Then click the Save button. It will take effect after rebooting.

Figure B-3

3. I want to use Netmeeting, what do I need to do?

If you start Netmeeting as a sponsor, you don’t need to do anything with the router.

If you start as a responsor, you need configure Virtual Server or DMZ Host as follows:

Method one: Use Virtual Server

add a Virtual Server rule as shown in the next screen: configure 1720 as the “Service Port” and

enter your IP address (assuming 192.168.1.102 for an example), then click select the status

Enabled and click Save.